Dimensions of Air Lift Air Helper Springs for Saab 900

Question

Question:

Can you tell me the deflated bag dimensions of the AL60756 kit?

asked by: Ryan

0

Expert Reply:

I reached out to the manufacturer, Air Lift, who told me the deflated springs on the Air Lift AirLift 1000 Air Helper Springs for Coil Springs # AL60756 measure about 3" x 8" when deflated.

These springs are a fit for a 1979-1991 Saab 900.

expert reply by: Kyle S

0

Answer 1

The Air Lift 1000 Air Helper Springs for Coil Springs part #AL60756 which are a fit for a 1987 Saab 900 stop the coil springs from compressing as much when a load is present. Therefore, if you are loaded or the factory suspension is worn, the air…

view full answer...

Answer 2

It sounds like you are trying to add a 7-way trailer connector to a 2021 Volkswagen Atlas and if that's the case we have some great options. That said, you'll have to start with a 4-way, the T-One Vehicle Wiring Harness part #118754 is…

view full answer...

Answer 3

The Air Lift 1000 Heavy Duty Air Helper Springs #AL60828HD have a height of 12-1/2" and width of 6". These are designed to fit the 2019-2022 Ram 1500. The Firestone Coil-Rite Air Helper Springs #F4175 fit select years of the Volkswagen…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 12

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...