Replacement Landing Gear Box for 2015 Jayco Pinnacle Fifth Wheel

Question

Question:

Will this fit 2015 Jayco Pinnacle.

asked by: Blake

0

Expert Reply:

The Replacement Gearbox for etrailer and Ram 5th Wheel Landing Gear # RVLG-RDBOX that you referenced is designed to fit Ram and etrailer brand fifth wheel landing gear part # RVLG-8000. This is a really common set seen on trailers but the even more popular option would be the # LC276602 which fits the brands Atwood, Venture, Lippert, and Stromberg-Carlson. Most likely this would be the kit you'd want.

expert reply by: Jameson C

0

Answer 1

It sound as if the motor when it experiences load is drawing too many amps causing it to blow the fuse. The Replacement Motor for Stromberg Carlson Electric Landing Gear part #LG-142178 is one of the most common replacements that we carry. I do not…

view full answer...

Answer 2

The Replacement Gearbox for etrailer and Ram 5th Wheel Landing Gear part #RVLG-RDBOX works on most landing gear sets like those from Ram, Venture, Lippert Etc. That said, I don't have any way to confirm for a particular trailer. The only set I am…

view full answer...

Answer 3

The correct replacement lead landing gear leg for a Ground Control 2.0 Leveling System is the Replacement Heavy Duty Driver Leg for Lippert Ground Control 2.0 Landing Gear part #LC241846 for standard (29-1/2" outer tuber body) or part #LC241845…

view full answer...

Answer 4

The gearbox #RVLG-RDBOX for the Landing Gear Set w/ Handle #RVLG-8HDL can be mounted in the horizontal or vertical position. I went out to the warehouse and tested both the gearbox and lead leg together and the pins that hold the gearbox in place…

view full answer...

Answer 5

Your gearbox for your 5th wheel landing gear, like part #RVLG-RDBOX, will make a bit of noise while you are operating it. However, if it is fairly old and the sound you are hearing is different than what it normally sounds like or if it is starting…

view full answer...

Answer 6

The Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended #LC241845 is a replacement for the Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 and will work on either side.

view full answer...

Answer 7

Mounting hardware does not come with the replacement gear box part #RVLG-RDBOX.

view full answer...

Answer 8

Yes, the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies #LC276602 is the correct replacement gear box for your VMC40RB-091565 gear box.

view full answer...

Answer 9

I don't know what landing gear set your trailer uses but thankfully, most are standardized so you should be able to use the Replacement Gearbox for etrailer and Ram 5th Wheel Landing Gear part #RVLG-RDBOX without issue. If you can send me a…

view full answer...

Answer 10

There unfortunately isn't a guide to tell us the weld stop spacing in your 2012 Genesis Supreme Vortex so you'll first want to measure so we can see if there's a compatible replacement without have to cut off your current mounting…

view full answer...

Answer 11

You'll need a new jack leg based on what you described. For a replacement you'd want the part #LC241845 for the driver side or part #LC241846 for the lead leg that is normally on the passenger side.

view full answer...

Answer 12

To determine the best landing gear option for your 1997 Forest River Sierra you'll need to measure the where your weld-stops sit to see if there is a matching set so that you can swap over without having to cut off the old mounting brackets and…

view full answer...

Replacement Landing Gear Box for 2015 Jayco Pinnacle Fifth Wheel

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching