Landing Pad Recommendation that Fits Yakima Q-Tower Roof Rack into Thule Top Channels

Question

Question:

I have a new Ford Transit Sportsmobile van with Thule roof tracks in the poptop 72. Can I use my older Yakima towers and cross bars now on a 2006 Toyota Tacoma with Yakima tracks?

asked by: Susan

0

Expert Reply:

The Yakima Landing Pad 1 part # Y00221 is designed to fit the same dimensions as Thule roof rack tracks and fit with your Q-towers and round crossbars. I believe that is what you are asking for.

expert reply by: Jameson C

0

Answer 1

The Yakima 60" HD Tracks #Y74MR are designed for installation on a flat surface. If these will be positioned on your 1999 Toyota 4Runner so the full 60" is on a flat surface then you're good to go. If you're needing something a…

view full answer...

Answer 2

The difference between the Yakima HD Crossbars like the #Y74MR and the regular Yakima Tracks like the #Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD…

view full answer...

Answer 3

Between the Thule Portage #TH819 and the Yakima KeelOver part #Y04069 I would go with the Portage. It is going to be easier to use and secure since it has the ratcheting tie-downs that you referenced as the pulleys. That will make securing the…

view full answer...

Answer 4

I reached out to Yakima in regards to bending the Yakima 42" Tracks for Roof Racks #Y01126 and they told me that yes it is okay to bend the tracks during the installation. For the rest of the installation you can use a quantity of two of the…

view full answer...

Answer 5

The Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 16 #RRQMFK11-4 are 30 x 25 x 5 mm; they are zinc and are an M6 thread. There isn't an option for channel nuts we have available that have an M8 thread.

view full answer...

Answer 6

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…

view full answer...

Answer 7

Yes, the 54" Thule Roof Mounted Top Rack System #THTP54 will work with the Anchor Plate "A" Kit for Yakima LandingPad 1 #Y8810074. The tracks come with everything you need for the installation (minus a power tool) and then the Anchor…

view full answer...

Answer 8

Yes, the Yakima Landing Pad 1 part #Y00221 does fit the Thule tracks like part #THTP54 that you referenced.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Landing Pad Recommendation that Fits Yakima Q-Tower Roof Rack into Thule Top Channels

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching