Does Draw Tite Hitch for 2019 Toyota Rav4 Interfere with Hands Free Liftgate

Question

Question:

Hi Will this hitch interfere with the kick feature that the rav4 limited has? Thanks

asked by: Jeff C

1

Helpful Expert Reply:

The Draw-Tite # DT82QR will allow full functionality of the liftgate on your 2019 Toyota RAV4, but you will just need to activate it your foot on either side of the hitch receiver instead of the middle. Otherwise, everything will be the same in regard to the liftgate.

expert reply by: Jameson C

1

Answer 1

In regards to the Curt Trailer Hitch Receiver part #C13416 which is a fit for a 2021 Toyota RAV4, the hitch pin hole is about 5" behind the rear bumper. The distance to the hitch ball would be dependent on the length of the ball mount. I am…

view full answer...

Answer 2

Between the Curt Class III Trailer Hitch #C13416 and the EcoHitch #306-X7396 for your 2019 Toyota RAV4 the EcoHitch will provide slightly better ground clearance but it is going to require some trimming on the rear fascia to allow room for the…

view full answer...

Answer 3

The best trailer hitch receiver for carrying bikes that fits your 2021 Toyota RAV4 Limited Hybrid is the EcoHitch Hidden Trailer Hitch Receiver #EH97FR. The reason for that is because it has the best ground and bumper clearance for a bike rack…

view full answer...

Answer 4

I spoke to Curt and they have had no issues with their #C13416 being installed on any of the 2021 Toyota RAV4 options currently available. From the pictures you provided, the frame and exhaust look to be the same as the 2021 RAV4 hybrid that we did…

view full answer...

Answer 5

Yes, the Curt Trailer Hitch Receiver part #C13416 is a confirmed fit for a 2021 Toyota RAV4 Hybrid. In regards to the hands free liftgate sensors, these will still be operational but you'll be limited to areas away from the receiver tube.

view full answer...

Answer 6

You'll just need to unlock the knob on the Thule T2 Pro XT #TH83JV and then continue tightening it down until it is snug, wobbling it along the way to make sure that it is secure in the hitch receiver. If you fast forward through the attached…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

The most concealed hitch for a 2024 Toyota RAV4 is the EcoHitch item #EH97FR. This hitch fits all models of the 2024 RAV4 including the Prime. The EcoHitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Does Draw Tite Hitch for 2019 Toyota Rav4 Interfere with Hands Free Liftgate

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching