Slip On Tow Mirror Recommendation for 2018 Ram 2500 with Puddle Lights and Chrome Covers

Question

Question:

2018 ram 2500 chrome mirrors with turn indicators and puddle lights. Do you have something that will fit? Thanks

asked by: Jim

1

Helpful Expert Reply:

For your 2018 Ram 2500 with chrome mirrors, turn indicators built into them, and puddle lights the K-Source tow mirrors part # KS80710 are a confirmed fit. The mirrors have cut outs in the bottom of them to allow the puddle lights to work and we've had several customers come with and say they fit well with their chrome covered factory mirrors.

expert reply by: Jameson C

1

Answer 1

Yes, the K-Source Snap & Zap Custom Towing Mirrors #KS80710 referenced in your question will fit the chrome mirrors on your 2016 Laramie Ram 1500.

view full answer...

Answer 2

Yes, your 2018 Ram 2500 with chrome mirrors will be able to use the Snap & Zap, with the correct part number being the following: - K-Source Snap & Zap Custom Towing Mirrors #KS80710

view full answer...

Answer 3

As long as the chrome mirrors of your 2016 Dodge Ram 1500 are not extendable or telescoping yes, the K-Source Custom Towing Mirrors #KS80710 will work for you. From the pictures I looked up for your truck you do not have the extendable mirrors so…

view full answer...

Answer 4

According to the manufacturer the #277-000399 replacement brackets will probably work for a AirrForce 42" hugger-style 4-blade ceiling fan without a light. They said they believe the same brackets are used for both. Since there is some…

view full answer...

Answer 5

The Replacement Brushed Chrome Brackets #277-000399, Black/Villa Fan Blades #277-94444 and Cherry/Maple Fan Blades #277-000398 are the only replacement ceiling fan parts we currently carry. I have included an image below with the measurements for…

view full answer...

Answer 6

The Longview Custom Towing Mirrors #LVT-3100C should work well for you as long as the shape of your mirrors match what are in the picture I attached. These mirrors will fit stock mirrors that have the puddle light/turn signals like what you have.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...