bing tracking image
Q & A Icon

What Is the Correct Replacement Awning Fabric for a 180 Inch Long Roll Tube  

Question:

MY MEASUREMENTS FROM BAR TO BAR COMES AT 180 INCHES SHOULD I ORDER THE 15 FT.AWNING MATERIAL

0

Expert Reply:

The correct way to measure for a replacement awning fabric would be from the center of the left and right support arms (see photo) and then round up to the nearest whole foot. This will then give you the actual roll tube measurement which is needed to determine the correct replacement awning fabric. If you were to use the actual size of the awning fabric or just the visible part of the roll tube you have now then the cover could be too short.

With that being said, if the visible roll tube measures 180" end to end then the awning fabric you need is most likely the fabric for 15' long roller assemblies. If you were looking for a sand fade then part # LCV000334387 is correct but we have several other colors which are attached for you. I called my contact at Lippert and they confirmed that the fabric for 15' long roller assemblies is most likely what you need. Generally speaking, the fabric will be around 11" shorter than the roller tube.

expert reply by:
0
Conner L
click to enlarge

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>