Will Curt Install Hitch # C11347 Fit 2018 Fiat 500 Abarth

Question

Question:

Hey, I contacted you guys recently about part number C11347, and was told the part does not fit a fiat 500 abarth 2018. I actually looked under the car and saw the same mounting points so I went ahead and ordered one anyway, and I just wanted to let you know that the part does fit the 2018 with absolutely no modifications and with no figment issue. I just thought this might help future customers find the right product for them. Thanks!

asked by: Tyler M

0

Expert Reply:

Thank you for sharing that with us! I am posting this on our site so that it will help future customers like you mentioned!!

expert reply by: Jameson C

0

Answer 1

Yes, we do have a hitch bike rack solution for your 2015 Fiat 500 Abarth convertible. Let's start with the trailer hitch receiver. Curt offers the Class I, #C11347, for your 2015 Fiat. This custom fit hitch installs with no drilling or…

view full answer...

Answer 2

Hitch fits for the 2015 Fiat 500 differ for Abarth versions due to their exhaust. Curt Class I hitch #C11347 fit the dual-exhaust Abarth model while hitch #C11363 fit non-Abarth versions. If you compare the photos of both hitch products (which have…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver part #C11347 is a confirmed fit for a 2012 Fiat 500 Abarth with the factory muffler. I have attached a photo of said muffler installed on the vehicle that the trailer hitch is designed to work with. If you have an…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...