Size of Mounting Screws Included with Replacement Mounting Bracket # HM40978

Question

Question:

What size are the provided mounting screws?

asked by: Robert W

0

Expert Reply:

The Replacement Mounting Bracket # HM40978 referenced in your question includes two 1 inch long self-tapping screws for mounting. I have attached a couple short video reviews that you can check out as well.

expert reply by: Chris R

0

Answer 1

The part #HM40975 is designed to fit the round 7-way connector that is found on several vehicles. To install it would require your vehicle to have this round connector. (see picture) If instead you needed a way to hardwire in a 7-way to a vehicle you…

view full answer...

Answer 2

I went out to the warehouse and pulled Replacement Mounting Bracket #HM40978 to measure it. The mounting holes are spacing 2-3/8 inches apart on center. I have included a picture and video for this bracket for you as well.

view full answer...

Answer 3

The bracket you're wanting to use is the #18136 from Tow Ready. This bracket uses a pipe clamp to attach to the hitch crossbar, as you don't want to put any holes in the hitch crossbar and weaken it. I've linked to a demonstration video…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Size of Mounting Screws Included with Replacement Mounting Bracket # HM40978

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching