Torklift Camper Tie Down Recommendation for 2019 Ford F-350 Diesel, SuperCrew, Cab Length Boards

Question

Question:

Will this work with a 2019 Ford F-350? 6 3/4 bed, super crew, 6.7l diesel, running boards are cab length. If not, do you have a product that will work?

asked by: Jeff R

0

Expert Reply:

Yes, I checked with Torklift and the front Torklift Tie Downs part # TLF2022 that you referenced are a confirmed fit for your 2019 Ford F-350 short bed, diesel, super crew, with cab length running boards. The rear set you need then is the part # TLF3008. For turnbuckles to go from the tie down to the camper we then have the part # TLS9050A which are stainless steel and would work great.

expert reply by: Jameson C

0

Kurt J.

7/2/2020

I have the same vehicle and am looking for the same set up. Would a 2.5" factory hitch work with this as well? Is that even a consideration?

Reply

Chris R.

7/7/2020

The fact that the factory hitch on your F-350 has a 2-1/2" receiver won't change anything. The TorkLift Camper Tie-Downs, parts # TLF2022 and # TLF3008, will still work perfectly.

Reply

Answer 1

TorkLift doesn't have their instruction manuals posted online so I'm unable to find the exact step by step instructions, but I was able to find a video where Shane will walk you through installing a similar front mounted tie-down model to…

view full answer...

Answer 2

Brophy Camper Tie-Downs #HSWB do not have a weight rating since they do not support the camper's weight. The truck bed and frame handle that actual camper load and the tie downs provide stability to prevent the camper from shifting in the bed.

view full answer...

Answer 3

Yes, the Brophy Clamp On Camper Tie-Downs Item #HSWB and the Brophy Basic Turnbuckles Item #TDHP are not only safe for use on your 2020 Ford F-250, they are a confirmed fit.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

view full answer...

Answer 9

The best solution for your Ford F-150 is to get two of the Durabilt Hammerlock Coupling Link for 1/2" Chain #DU96MR. This style of link is a little difficult to install but it's very secure and is designed specifically for the size of chain…

view full answer...

Answer 10

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY98GR weighs 120 lbs. I have attached a schematic below. This adapter is designed to replace the Lippert Rhino 5th-wheel pin boxes. If you do not have a Rhino pin box you won't be able to use…

view full answer...

Answer 11

The pin weight of a 5th wheel trailer will usually be around 20% of the trailer's gross trailer weight (GTW) rating. The only real way to find the loaded pin weight of your 5th wheel trailer would require access to a commercial scale used to…

view full answer...