Compatibility of Curt True Course Electronic Sway Control With Curt Echo Trailer Brake Controller

Question

Question:

Looking for simplicity in plug and play options so wondering if the Curt True Course will work with the Curt Echo mobile brake controller. Are these compatible?

asked by: Mandy

0

Expert Reply:

The Curt Echo Brake Controller # C51180 is compatible with the Curt True Course Electronic Sway Control System # C94VV. The brake controller will give the brake output the unit needs as well as the pass through of the 12V power needed for the electronic sway control unit. This combination is an easy to install and easy to use combination for trailers with up to 4 electric brake assemblies. It will be simply plug and play.

expert reply by: Jason S

0

click to enlarge

Answer 1

You can use the Curt True Course #C94VV with the Curt Echo #C51180 but you'd want to have the Echo installed first (plugged into vehicle 7-way) and then the True Course behind it as it is designed to allow brake controller signal to pass through…

view full answer...

Answer 2

The Drill Adapter for Atwood Direct Drive 5th Wheel Landing Gear is really for the landing gear on a 5th wheel but may work well with other Atwood jacks. However, it's also been discontinued. I believe what you are looking for and recommend is…

view full answer...

Answer 3

We do not have a transmission cooler that is confirmed to fit your 2021 Hyundai Palisade, but more than likely have one that will work you will just need to measure how much space you have available for one. If you have enough space for a cooler that…

view full answer...

Answer 4

We don't carry the Hayes system, but I can explain the differences between the Tuson #335TSC-1000 Asymmetric Sway Control and the Lippert #LC380605 Sway Command. • The Tuson is compaitble with 1 to 4 brake axles, while the Lippert is only…

view full answer...

Answer 5

Yes the Curt Echo Mobile brake controller #C51180 is perfectly compatible with the Tuson Asymmetric Sway Control #335TSC-1000 that you referenced.

view full answer...

Answer 6

The Curt True Course part #C94VV that you referenced is weather resistant which means it can experience rain without issue. You wouldn't want to submerge the unit like when launching a boat but it was designed to withstand rain easily.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 11

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV wins for ease of install and it does a really good job but if you were wanting the best sway control that applies the left and right brake assemblies independently the Tuson…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...