2018 Honda Odyssey Trailer Wiring Harness Installation
Question:
In your video comparing your Expert Review Video of top 3 recommended trailer hitches for the 2018 Honda Odyssey https://www.etrailer.com/hitch-2018_Honda_Odyssey.htm, at 3:54 you show the Draw-Tite 76171 with the wiring harness coming from underneath/behind the bumper and attached to the mounting bracket with part 18144. However, all the wiring harnesses I have seen T-one 118781, Curt, etc show the wiring harness linking into the panel in the cargo area on the drivers side and then closing the rear door on it. How did you connect the wiring harness the way it is showed in the video so that it is permanently installed from underneath and not having to extend it out of the cargo area and shut the door on it? Is there a grommet port, etc? What wiring harness did you use in the video? Thanks!
asked by: KJ
Expert Reply:
With any 4-pole wiring setup the flat connector can be either routed outside the vehicle and permanently installed in a mounting bracket setup as with parts # 18144 and # 18136 or it can be left inside the vehicle so that it is not continuously exposed to the elements.
This is true for universal hardwire harness kit # C59496 that you referenced as well as for the custom-fit items made specifically for your 2018 Odyssey, which are shown on the linked page. These include 4-pole kits like # C56382 from Curt and # 118781 from Draw-Tite, which is the item you selected. Either of these custom parts will be easier to install than a hardwired kit like # C59496 since you do not need to cut into the vehicle's wiring.
For those that tow very frequently the external mount option is likely to be preferred for its handy access. But for occasional recreational towing we recommend keeping the 4-pole safely tucked inside the vehicle when not in use which protects it from moisture, dirt, salt and the potential for damage from road debris, such as rocks that might be kicked up as you drive.
There is no risk to the wiring from closing a rear hatch on it since the flexible gasket material around hatches provides more than adequate cushioning. Simply avoid the latching mechanism. The benefits to keeping the wiring tucked away except when in use include reduced risk of deterioration of the contact surfaces. Destructive corrosion may not always be obvious; even a slight whitish discoloration on the contacts can cause signal transmission issues.
Often owner's of a newer vehicle will prefer not to have to drill a hole or enlarge an existing grommet to route the wiring. I recommend keeping the harness inside the vehicle as shown in the linked video. For further protection of the connector I suggest an application of dielectric grease like # 11755.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hitch and Wiring Harness for 2024 Honda Odyssey EX-L
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Recommended Wiring Harness for a 2024 Honda Pilot
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Recommended Hitch for a 2023 Toyota Highlander w/ the Full Size 20" Spare Tire
- Article: Most Popular Wheel Bearings
- Q&A: What Does E6 Furrion Thermostat Indicate
- Q&A: What Hitch Do You Recommend for a 2024 Toyota RAV4?