Longer Crossbar Rhino Rack Roof Rack for Track Mount

Question

Question:

Can this be ordered with a longer width of crossbars. I need them to be about 70inch so that I can cut them to the appropriate size to span the width of the bed of my truck.

asked by: Ruben

0

Expert Reply:

The closest option we have is the Rhino Rack part # Y02-500B which gives you a similar aero shaped crossbar setup that has 65 inch long crossbars. The bars are through-bar style which means they stick out past the feet of the rack.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Thank you for the photo; and while it is very likely, I don't have the exact dimensions of the Leer Hi/Lo camper shell on your 2004 Chevy Silverado with an 8 foot bed in order to say with certainty if you can use the Rhino-Rack roof rack you…

view full answer...

Answer 2

Rhino-Rack #Y02-480B works for a camper shell on your 2021 Toyota Tacoma. This rack mounts directly to your cap. We don't have any roof rack or ladder rack options that fit around a camper shell.

view full answer...

Answer 3

Yes, if you wanted to cut down the length of the tracks of the Rhino-Rack Roof Rack System w/ 2 Sportz Crossbars #Y02-480B you certainly could. The bars come 54 inches in length and the tracks are 63 inches long.

view full answer...

Answer 4

If you are able to and want to just lay the kayaks on a roof rack you can install the TracRac CapRac #TH29200XT onto the truck's camper shell and secure them using ratchet straps like #EM34415. Another option is to add the Swagman Roamer LT…

view full answer...

Answer 5

The difference between the Rhino-Rack Roof Rack System #Y02-490B and #Y02-490B-ST is that the #Y02-490B-ST is designed to be mounted on thicker truck caps and roofs and comes with 2" long mounting bolts; for reference the #Y02-490B comes with…

view full answer...

Answer 6

Since your factory roof tracks are removed, you will need a complete roof rack kit that includes the roof tracks. I think your best option is to go with Rhino-Rack Aero Bar Roof Rack #Y02-480B.. This kit includes 63" long tracks that will be…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...