Can Tracks of Rhino-Rack Roof Rack System w/ 2 Sportz Crossbars be Shortened

Question

Question:

Are the tracks able to be cut to length for a custom application?

asked by: Adam M

1

Helpful Expert Reply:

Yes, if you wanted to cut down the length of the tracks of the Rhino-Rack Roof Rack System w/ 2 Sportz Crossbars # Y02-480B you certainly could. The bars come 54 inches in length and the tracks are 63 inches long.

expert reply by: Jameson C

1

Answer 1

I'll start out by saying that the Rhino Rack roof mounted tracks like the ones included in the #Y02-480B come with caps that go on the ends of the tracks that can be removed and replaced if needed and allow you to cut the track to whatever length…

view full answer...

Answer 2

63 inch long tracks are included with the Rhino Rack Roof Rack part #Y02-480B that you referenced. The crossbars are 54 inches long.

view full answer...

Answer 3

The distance from the bottom of the crossbar of the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B to the track it mounts in measures 3 inches.

view full answer...

Answer 4

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 5

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B is a great option for fiberglass truck bed campers as it was made for this exact purpose. It can support up to 220 lbs but bear in mind this rating is tested independently of the…

view full answer...

Answer 9

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 10

Yes. You will need to use everything included with the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - Black - 65" #Y01-140B-NT to install into the tracks you have pictured. The bases of the legs mount right into the…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit #Y02-480B which we do offer with the part #RTC16.

view full answer...

Can Tracks of Rhino-Rack Roof Rack System w/ 2 Sportz Crossbars be Shortened

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching