Can Ground of Tekonsha 4-Way part # 118467 Ground Reverse Cameras

Question

Question:

Is the earth wire in trailer plug good enough 4 reverse camera

asked by: Barney

0

Expert Reply:

Yes, the ground wire of the Tekonsha 4-way part # 118467 would adequately ground 4 reverse cameras. The ground on the trailer wiring does most of the grounding but also the metal connection between the trailer frame/coupler to the trailer hitch/vehicle frame helps as well.

expert reply by: Jameson C

0

Answer 1

I attached a picture to this page that shows what the Draw Tite Hitch part #76271 looks like when installed and you can see that since it hangs below the rear bumper it would affect ground clearance. You can see the same picture in the attached link…

view full answer...

Answer 2

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76271. This is a custom fit hitch that lets you carry a bike rack, cargo carrier or trailer with your Subaru Forester. It comes with the hardware kit, it…

view full answer...

Answer 3

Installing the Draw-Tite #76271 trailer hitch that fits your 2019 Subaru Forester will not require you to remove the rear bumper cover and bumper to install. The exhaust is going to need to be lowered for you to install it, though this is standard…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

For your 2019 Subaru Crosstrek I highly recommend the Tekonsha T-One Vehicle Wiring Harness #118467, which will plug right into the factory port that's either located behind the driver's-side trim panel or in the spare tire compartment in the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...