How to Display Engine Oil Temp and Engine Oil Pressure with the Edge Insight CS2
Question:
I dont see where oil pressure or oil temp are displayed on this unit ?
asked by: Robert
Expert Reply:
In order to select engine oil pressure (EOP) and or engine oil temperature (EOT) as the parameters that the Edge Insight CS2 Comprehensive Gauge Display part # EP84030 displays on the home screen (if applicable) you will need to follow the six steps I have listed for you below.
Step 1: While viewing a gauge layout screen, press the Enter button. A gauge location will be highlighted.
Step 2: Use the arrow buttons to highlight the gauge location that you would like to modify.
Step 3: Highlight the Select New PID option. Then press Enter.
Step 4: Use the Up/Down arrow buttons to highlight a new PID, then press Enter.
Step 5: Select each of the remaining options to further customize your gauge.
Step 6: Return to the main gauge screen. The new PID will be displayed along with any customized options you may have changed.
Please note that in step 4 you may need to scroll down to the next page in order to find the engine oil pressure and or engine oil temperature parameter. They could also be abbreviated as EOP or EOT respectively. If you still do not see the engine oil pressure and or engine oil temperature parameters then please let me know the year, make, and model of the vehicle as not all vehicles have the ability to monitor these parameters.
Ray D.
7/9/2020
I have the cts2 evolution diesel on a 2002 7.3. and I'm not finding the EOP on my guage selection.
Product Page this Question was Asked From
Edge Insight CS2 Comprehensive Gauge Display - Color Screen
- Performance Chip
- Monitors
- Color Screen
- Yes - California Approved
- Insight
- Edge
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Buyers Products Weld-On Safety Chain Retainer For 3/8" Chain
- Q&A: Does Edge Insight Programmer Have Ability to Show Engine Oil Pressure
- Q&A: Does Edge Insight CS2 Have a Fuel Gauge
- Q&A: What is the Purpose of the Transmission Tune on Edge Gas Evolution CTS3 Performance Tuner
- Q&A: Can Tow Haul Mode on 2005 Chevy Silverado 1500 be Used with Tow Tune on Edge CS Evolution Programmer
- Q&A: What Parameters Does the Edge Insight CTS Monitor
- Q&A: After Returning 2008 Chevy Silverado 4.8 to Stock w/Edge Programmer Will the Truck Run Any Different
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Trailer Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Video: Titan Trailer Brakes T2385200 Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Shop: Grease Seals 10-36 (pair)
- Search Results: 68149
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: dust cap
- Article: Trailer Tire Sizing
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Fifth Wheel Hitch
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Gooseneck Hitch
- Search Results: equalizer
Shane S.
3/18/2024
I got a cts3 on my 2002 f250 with a 7.3 and I can’t fine EOP