Does Thule Xsporter Pro Adjustable Ladder Rack Fit 2017 Toyota Tundra

Question

Question:

Hello, i bought this rack Thule Xsporter Pro Adjustable Height for my tacoma about a year ago, aNd now i have upgraded to a Tundra CrewMax 5.5 bed . Im jist wonderinf if there is any way i can alter the rack to fit the tundra now. Seeing as the tundra is abit wider about 3inch more. Or will i have to unfortunately buy a new one for the tundra?

asked by: Kevin M

0

Expert Reply:

The Thule Xporter Pro Ladder rack part # TH500XTB is a confirmed fit for your 2017 Toyota Tundra as long as you don't have the deck rail system. If you have the # TH500XTB you then have everything you'd need. You just wouldn't use the mount kit that you have now that was Tacoma specific.

expert reply by: Jameson C

0

Answer 1

From what I could find, it looks like the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack that you have on your 2017 Toyota Tacoma will fit your 2021 Toyota Tundra. Taking a look at the racks that fit both those vehicles, they both use the…

view full answer...

Answer 2

Adapter Kit #THXK4B is only for the 2016 to present Toyota Tacoma and will not fit the Tundra. Thule does not have an adapter kit for the Tundras. But you can use Rola ladder rack #59799 directly because it comes with hardware to mount to the factory…

view full answer...

Answer 3

For your 2018 Toyota Tacoma we have the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack #TH500XTB-THXK4B which would be a great option since you said you wanted something height adjustable. You can adjust the height of this rack between 6…

view full answer...

Answer 4

The Thule UpRide Roof Bike Rack #TH599000 referenced in your question will fit T-tracks that measure 20x20 mm. I recommend taking a quick measurement on your VW factory crossbars to see if its built-in channel matches this dimension. Otherwise, the…

view full answer...

Answer 5

The t-bolt used will depend on the accessory being installed. I reached out to my contact at Retrax to find the size of the track to know what size t-bolts it will accommodate. The track measures 13/16 inches wide x 1/4 inch tall with the top opening…

view full answer...

Answer 6

The channels of the RetraxONE XR part #RTT-82383 are a standard size which means standard roof rack t-bolts like the #853-5715 would work.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...