Can SeaSucker Board Carrier Carry a 10-1/2 long 33 inch wide 66 lb Kayak with 2004 Hyundai Tiburon

Question

Question:

I was wondering if the seasucker board rack is compatible my kayak. My kayak is 10.5 feet long and 33 inches at its widest point and 66 lbs. 2004 Hyundai Tiburon. Thank you.

asked by: Mason T

0

Expert Reply:

Yes, the SeaSucker Board Carrier # 298-BX1806 that you referenced can handle a 10-1/2' long x 33" wide kayak that weighs 66 lbs. I reached out to my contact at SeaSucker who confirmed this for me.

Just be sure to tie the bow/stern down as well. I recommend using the Rhino-Rack Bonnet Tie-Down Strap with Anchor # RRRBAS1-2 to do so.

expert reply by: Jon G

0

Answer 1

If you are looking for an option to mount a kayak to the outside wall of a 4x6 enclosed carry-on trailer, I recommend the SeaSucker Monkey Bars #298-SX6000B. The Monkey Bars have state-of-the-art vacuum cups that apply a tremendous amount of pressure…

view full answer...

Answer 2

I have a great SeaSucker solution for you to transport your kayak. However, with the SeaSucker Surfboard Carrier - 2 Surfboards or SUPs #298-BX1806, this carrier is not extendable and they are only designed to work with either surfboards or stand-up…

view full answer...

Answer 3

SeaSucker doesn't currently produce a dedicated kayak rack, however, if you have a kayak that is less than 45 pounds, you may be able to use the SeaSucker Surfboard Carrier, part #298-BX1806 as a viable alternative. The Surfboard/SUP carrier does…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...