Can In/Out LED Rocker Switch be Used for any Winch

Question

Question:

Will this switch work on all 4 pin winches mine is not a bulldog Im not sure the brand but its a4 pin.the reason Im asking is I just bought one from you and it light up but doesnt move the winch

asked by: Tom H

0

Expert Reply:

You should be able to use the In/Out LED Rocker Switch For Bulldog Winch # BDW20261 for your winch. If you take a look at the linked video you can see this switch being installed if you forward to about the 10:00 mark.

You do need to make sure it is wired correctly and I have added the diagram Bulldog has provided to help. It is grainy but says 1: Winch Power Out, 2: Power 12V, 3: Winch Power In, 7: Ground. You will need to use Primary Wire - 16-Gauge # 16-1-1 and Spade Terminals # DW01899-1.

expert reply by: Kyle S

0

click to enlarge

Answer 1

I spoke with my contact at Bulldog Winch and he was able to send me a diagram that shows how the In/Out Rocker Switch part #BDW20261 wires up.

view full answer...

Answer 2

When wiring the In/Out LED Rocker Switch #BDW20261 you will have two pins being your power and ground. Then the bottom two are going to be your in and out pins which will connect to your universal solenoid. For ground, just take a self tapper and…

view full answer...

Answer 3

The #BDW20261 will fit all Bull Dog winches that have 4 pin switches. If instead you need a 5 pin switch you would want the part #BDW20258. Take out the switch of your winch and count the pins to see which you would need.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Can In/Out LED Rocker Switch be Used for any Winch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching