Will the Draw-Tite Hitch 76227 Fit a 2019 Subaru Outback Wagon

Question

Question:

Draw-Tite says #76227 will fit a 2019 Subaru Outback, do you agree?

asked by: Steve

1

Helpful Expert Reply:

Yes, I checked with the manufacturer and they do list the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76227 as a fit for a 2019 Subaru Outback Wagon so I agree. The installation will be the same as a 2017 model year which I have attached an install video of for you.

expert reply by: Conner L

1

Answer 1

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 which is a fit for a 2010-2019 Subaru Outback will install via eight total 10mm nuts which are actually reused as they are the factory fasteners for the bumper beam. The most up to date…

view full answer...

Answer 2

Good morning! At this time (September 2018) we do not yet have an installation video for the Draw-Tite Max-Frame Trailer Hitch Receiver #76227 on the 2017 Subaru Outback Wagon. I have however attached the complete written instructions that you can…

view full answer...

Answer 3

For your 2018 Subaru Outback Wagon the Draw Tite hitch part #76227 is superior over all of the other hitches available. It has a 2 inch opening which is the most popular hitch size (more accessories are made to fit it), and has higher capacities at…

view full answer...

Answer 4

When installing Draw-Tite hitch #76227, once you remove the 7 push pins from the bottom edge of your 2017 Subaru Outback's fascia, look for a tab under both tail lights and open it up with a flathead screwdriver. There are screws in each you need…

view full answer...

Answer 5

The Draw-Tite Max-Frame Trailer Hitch #76227 will absolutely fit your 2019 Subaru Outback so long as it is not the Sport model. The accompanying photo shows this hitch installed on a '19 Outback so you can see for yourself what it will look like.…

view full answer...

Answer 6

Our trailer hitches are rated separately from the vehicle they fit. Basically they design the hitch to fit the vehicle and to be as strong as possible, they determine the capacities of the hitch, and then that's what they list for it. BUT, the…

view full answer...

Answer 7

The Draw-Tite trailer hitch receiver, part #76227, is confirmed to fit your 2015 Subaru Outback Wagon Limited. We haven't had a chance to install this hitch so we don't have a video as of yet. However, I have linked the install details for…

view full answer...

Answer 8

The best trailer hitch for your 2018 Subaru Outback Wagon to use with your existing 2 inch bike rack is the Draw-Tite Class III #76227. This is because it pairs strength (600 pound tongue weight rating is highest available for the Outback) with…

view full answer...

Answer 9

I can absolutely help with your decision on selecting the best 2" trailer hitch receiver for your 2019 Subaru Outback Wagon. Out of all the options available (which as you mentioned are plentiful) I highly recommend the Draw-Tite Max-Frame…

view full answer...

Answer 10

To install the Draw-Tite Max-Frame Trailer Hitch Receiver #76227 on your 2018 Subaru Outback you only need a torque wrench capable of more than 50 ft. lbs, which is going to be most of them. I recommend getting one that has a wider range for other…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Will the Draw-Tite Hitch 76227 Fit a 2019 Subaru Outback Wagon

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching