Ladder Rack Compatible With Truxedo Lo Pro QT Tonneau Cover on 2018 Ford F-150

Question

Question:

I have the lo pro qt tonneau on my 2018 f-150. i LOVE this cover but now I really want a ladder rack so what is going to work for me?

asked by: Jordan A

0

Expert Reply:

The ladder rack that you can use with the Truxedo Lo Pro QT Tonneau Cover # TX598301 (6-1/2 Foot Bed without cargo management system) or # TX598701 (8 Foot Bed) needs to mount on top of your 2018 Ford F-150's bed rails.

The rack I highly recommend for that is the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-501 (6-1/2 Foot Bed) or # TH43003XT-000 (8 Foot Bed) because it will give your '18 F-150 a compatible ladder rack that offers a combination of durability, strength and adjustability.

The TracRac SR can be adjusted back and forth along the base rails and comes with four load stops which you can adjust on the crossbars to make carrying many different shapes and sizes of cargo much easier than with racks that are in a fixed position. This ladder rack has a 1,250 lb capacity, installs easily in the stake pockets of your F-150 and is made in the USA.

I have added a link to a video review of this ladder rack for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Yes the Yakima Overhaul HD part #Y01151-5755 fits directly to the Truxedo Rail Kit part #TH75FR you referenced without any additional adapters.

view full answer...

Answer 2

The Kuat Ibex Adjustable Overland Truck Bed Rack #KU96ZR will come with clamp-on connectors, but you can purchase the Retrax Tonneau Cover Mounting Rails for Kuat Ibex Truck Bed Racks #KU77ZR to mount it to either Retrax or LineX tonneau covers with…

view full answer...

Answer 3

Tonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them. As an example, the…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 6

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 7

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 8

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 9

Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with a…

view full answer...

Answer 10

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 11

Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake controller…

view full answer...

Answer 12

I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses. The easiest…

view full answer...

Ladder Rack Compatible With Truxedo Lo Pro QT Tonneau Cover on 2018 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching