Trailer Hitch Recommendation for 2019 Toyota Camry

Question

Question:

Hi there. I bought a hitch receiver for my 2015 Toyota Camry LE. Im about to purchase a new 2019 Toyota Camry LE. Is the hitch transferable? Thanks!

asked by: Edward Z

0

Expert Reply:

There was a big enough change to the Toyota Camry in 2018 that the hitch manufacturers had to come up with a new fit. So the hitch from your 2015 Camry would not transfer to the 2019 and you'd need a new hitch. For that the Curt hitch part # C11576 which is a confirmed fit and would work well.

expert reply by: Jameson C

0

Answer 1

Good news! The answer is yes, a hitch can be mounted to your 2022 Toyota Camry. The Curt Trailer Hitch Receiver #C11576 is confirmed to fit the 2022 Toyota Camry, including the Hybrid models. This hitch has a bolt-on, no-drill installation and will…

view full answer...

Answer 2

There is a trailer hitch fit for a 2020 Toyota Camry, the Curt Trailer Hitch Receiver #C11576.

view full answer...

Answer 3

We do have a trailer hitch receiver that fits your 2024 Toyota Camry, from Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C11576

view full answer...

Answer 4

For a great hitch for your 2022 Toyota Camry Hybrid, I recommend the Curt Trailer Hitch Receiver - 1-1/4&quot; #C11576. Apart from providing your vehicle with 200 pounds of maximum tongue weight and 2,000 pounds of maximum towing weight…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C11025 is a confirmed fit for your 2012 Kia Optima. Installation of an aftermarket trailer hitch or any other part will not void the warranty as consumers are protected by the Magnuson-Moss warranty act that states,…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Trailer Hitch Recommendation for 2019 Toyota Camry

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching