Recommended Camera System for Truck and Trailer Viewing on Same Monitor

Question

Question:

This part is being installed in the rear mount provided on my camper. The screen will be in my truck. The product makes it seem as though an additional camera can be used in addition to the camper that comes with the product. The additional camera would be a rear back up license plate camera or seeing toe hitch connection. Can you please provide me with any additional information about this additional camera Set up. Thank you

asked by: Derek

0

Expert Reply:

The Wireless Observation System w/ LED Monitor - 7" Screen # 324-000002 is able to utilize multiple cameras but it isn't the isn't the best wireless system. For a multiple camera system, I recommend the Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 5" Screen # FOS05TASF. Then for an additional camera with either of these systems you can use the Furrion Vision S Rear Camera w/ Sharkfin Bracket # FCN48TASF.

If you are willing to go to a wired system, then you can get the functions you are seeking with the Rear View Safety Backup Camera System with Trailer Tow Quick Connect Kit - 2 Cameras # RVS-770614-213. Then you can use the Rear View Safety License Plate Bracket for Backup Camera # RVS-401.

To use the camera for backup only, you will connect it to your reverse light circuit. For constantly on observation system you will connect to your running light circuit.

expert reply by: Jason S

0

Answer 1

The Furrion Vision S side camera kit #FCE48TASL is designed to be wired to your RV's running light circuit. If wired to the turn signal circuit, they would not work properly. Marker lights, including the ones that come in this kit, do not…

view full answer...

Answer 2

The measurements for the Lippert 1716 5th Wheel Pin Box - 15,500lbs #LC1324791 are as follows: 3A: 20-3/8" 3B: 29-1/8"

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 6

The Voyager WiSight Wireless RV Backup Camera System #ASA37YR you were looking at is only compatible with the RV Backup Camera #ASA74YRor #WVH100 so this would need to be the camera you already have installed or you would need to replace the…

view full answer...

Answer 7

We do have what you need, but since your 2022 Winnebago 2529RG is prewired for the Voyager system you will not want to use the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR that you were looking at. Because you will…

view full answer...

Answer 8

Thanks so much for the photo, it was super helpful, and what it shows is that your trailer has the Voyager WiSight Pre-Wire Plate. This will allow you to mount the Voyager WiSight camera system: - Voyager WiSight Wireless RV Backup Camera System…

view full answer...

Recommended Camera System for Truck and Trailer Viewing on Same Monitor

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching