Trailer Hitch Recommendation for 2019 Jeep Wrangler

Question

Question:

what trailer hitch should I get for my 2019 Jeep Wrangler?

asked by: Tommy

0

Expert Reply:

The trailer hitch I recommend for your 2019 Jeep Wrangler is the etrailer.com hitch part # E98856 because it's made in the USA, has great weight capacities, and has an extended hitch tube to make fitting hitch bike racks easier to fit around the rear spare.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We can't recommend you drill into the base plate to mount the breakaway switch as that would void the warranty of the base plate kit. Instead I would recommend mounting the switch to the bumper of the vehicle.

view full answer...

Answer 2

If you are worried about the possibility of a bike rack hitting your flat towed 2013 Toyota Tacoma, then a few quick measurements might help. Hollywood Racks RV Rider Bike Rack #HLY64FR, measures 32 inches from the center hitch pin hole to the…

view full answer...

Answer 3

The correct covers for 1-1/2" openings are the Roadmaster EZ Base Plate 1-1/2" Receiver Covers - Qty 2 Item #RM-210.

view full answer...

Answer 4

I think the best trailer hitch receiver for your 2021 Jeep Wrangler is the etrailer Trailer Hitch Receiver - Class III - 2" #e98856. This receiver tube is longer than others which typically allows for accessories, such as bike racks and cargo…

view full answer...

Answer 5

The main difference between the Roadmaster Crossbar Style Baseplate #RM-524431-4 and the Roadmaster Direct Connect Baseplate #RM-524431-5 comes down to the ease of installation of the tow bars; typically vehicles that require some extra stability…

view full answer...

Answer 6

The only difference between the Roadmaster Direct-Connect Base Plate Kits like part #RM-523179-5 and the Roadmaster Crossbar-Style Base Plate Kits like part #RM-523179-4 are the removable arms. The Direct-Connect style means you can attach a tow bar…

view full answer...

Answer 7

The Brake Buddy Select systems like the 3 part #HM39524 draws power directly from your towed car's battery. To do this, the included wiring harness connects to your car's battery for the charge. Install the harness by routing the wire end…

view full answer...

Answer 8

The Replacement Breakaway System for Brake Buddy Classic and Select Supplemental Braking Systems part #HM39340 replaces the brake away switch for the brake buddy Classic II, Select II, Classic 3 (#HM39494), and Select 3 (#HM39524). We have not yet…

view full answer...

Answer 9

The 3rd brake light on the 2020 Jeep Wrangler runs on a separate circuit from the other lights, and the Roadmaster Universal Hy-Power Diode Wiring Kit #RM-154 and any other tow bar wiring kit, do not provide for a way to connect to those circuits.…

view full answer...

Answer 10

When we installed the Curt Trailer Hitch Receiver #C94WR on a 2022 Hyundai Tucson we found it to have a hitch height of 17" to the inside top of the receiver. This will put you at 14-1/2" of ground clearance to the bottom of the receiver.…

view full answer...

Answer 11

Starting with the trailer hitch I highly recommend the etrailer.com Class III #e98856 for your 2020 Jeep Wrangler (congrats on the new Jeep, by the way). This Class III hitch is designed specifically for your Jeep Wrangler in more ways than one.…

view full answer...

Answer 12

In regards to the Adjustable Width Trailer Hitch Receiver for RVs part #13703, the brackets have a built-in offset so you can install them in a manor which pushes the crosstube further out towards the bumper. This will help reduce clearance issues…

view full answer...

Trailer Hitch Recommendation for 2019 Jeep Wrangler

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching