Replacement Slide-Out Motor for 300 Schwintek on 2017 Forest River Forester SLE 2851

Question

Question:

Yes 300 schwintek track

asked by: Peggy

0

Expert Reply:

Would you be able to check your motor to see what kind of gear ratio it has and if it is a Lippert Components In-Wall Slide-Out? Unfortunately manufacturers don't keep public records of that kind of stuff so I wouldn't be able to tell you just using the year/make/model of your motorhome.

expert reply by: Jon G

0

Peggy

11/20/2018

Yes 300 schwintek track

Reply

Jon G.

11/20/2018

Thank you for letting me know! I spoke with my contact at Lippert and she said that the In-Wall RV Slide-Out Motor # LC236575 would be what you are wanting as it has a gear ratio of 300:1 like your current system has. To ensure that this fits properly she said that you would need to pull back the seal on the upper half of the H column to find the system number. This will either be an RPO or V000 number. If you can take a picture of this I can verify with my contact that this will work.

Reply

Answer 1

The only difference between a Lippert slide-out motor with a 300:1 gear ratio and a 500:1 gear ratio, is torque. The 500:1 gear ratio will provide this motor with more torque. As they have the same dimensions and design, you can use the 500:1 gear…

view full answer...

Answer 2

I have a complete replacement option for you, but when Lippert bought out Atwood they discontinued the Atwood Leveleg parts so a replacement controller is no longer available. Instead I recommend replacing your system with the Lippert Ground…

view full answer...

Answer 3

We have a Lippert Components replacement slide motor that will work with the Schwintek system. It is the Lippert In-Wall RV Slide-Out Motor #LC236575. It is a gear ratio of 300:1.

view full answer...

Answer 4

With valve stem extensions like the part #WM8001-135 that you referenced we have a few options based on how they attach. These attach to the hub whereas other options would clip to a wheel cover if there was one present. Not all wheels have wheel…

view full answer...

Answer 5

The Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend #WM8001-135 would be the correct inflation kit for the dually setup of your Thor Freedom Elite. This will attach both of the valve stems to the…

view full answer...

Answer 6

I went ahead and found a wiring diagram for the Single Slide-Out Switch #37212285, and you are going to need to just match the hot from your trailer to the power (+) pin, and then match the green and blue wires to the motor (+) pins. I have attached…

view full answer...

Answer 7

We have a Lippert Components replacement slide motor that will work with the Schwintek system. It is the Lippert In-Wall RV Slide-Out Motor #LC236575. It is a gear ratio of 300:1. This is the correct replacement for the Schwintek IG420294X00096R.

view full answer...

Answer 8

Square axles normally don't have spring seats like a round axle but do have a hole for the leaf spring bolt to fit into. Take a look at the CE SMITH #CE33201GA-HUB for a visual. The U-bolt mounting kits will have a hole in the center for the…

view full answer...

Answer 9

We've checked with Jensen in the past and for your AWM970 RV stereo the simplest replacement solution is the Jensen part #JWM60A that you referenced.

view full answer...

Answer 10

While not required as it is a 5th wheel hitch, safety chains are always a good idea, including for the Curt CrossWing Lightweight 5th Wheel Trailer Hitch #C86JR. There are even specific chains and mounts for the CrossWing, the Curt Safety-Chain Loops…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Replacement Slide-Out Motor for 300 Schwintek on 2017 Forest River Forester SLE 2851

Product Page this Question was Asked From

Continue Researching