Towing Mirror Recommendation for 2018 Nissan Titan

Question

Question:

I have a 2018 Nissan Titan XD. What type of towing mirror would you recommend?

asked by: Stacey

0

Expert Reply:

We installed the CIPA towing mirrors part # CM11980 on a similar 2018 Nissan Titan as yours and we found they fit and worked well. We also installed the # 11953 on a 2017 Nissan Titan and they worked well too.

If you scroll down you'll see the two install vids we did for each mirror on your truck.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The replacement mirrors you mentioned are only a fit for a Nissan NV 1500, so they won't fit your Titan; I checked with the manufacturer and there are no extendable or custom-fit mirrors for your 2018 Nissan Titan, so the only option is going to…

view full answer...

Answer 2

Hi Rene; I'm sure it's frustrating to have the mirror fall off, and while there are only universal towing mirrors for your 2016 Nissan Frontier, there are better ones than the clamp-on (which I also do not like). I would definitely go with…

view full answer...

Answer 3

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 4

The K-Source tow mirrors #KS3990 would work great on your 2023 Ford Expedition. We had a chance to install them on a similar 2018 Ford Expedition and found they installed easily, worked great, and the highest reviewed option we know fits.

view full answer...

Answer 5

I do have a solution for you but there have actually never been any custom towing mirrors made for a Nissan Frontier and so I would be surprised if any ever come out for your 2019 Nissan Frontier. Since this is the case I recommend using the K-Source…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Unfortunately we don't have any photos or videos of the Curt Trailer Hitch Receiver #C15306 installed. I have attached a similar hitch that also fits below a factory hitch similar to assist. It will have a slightly different look but give you a…

view full answer...

Answer 8

I do have a possible solution for you, however there is not going to be an option to upgrade only the housing and fan you'd have to do a complete swap. With that being said, a great upgrade for your discontinued Dometic EZ-Breeze is the…

view full answer...

Answer 9

We have exactly what you need for your 2019 Nissan Titan XD, the Curt Trailer Hitch #C15306, because this monster of a hitch is Class V rated with a towing capacity of 16,000 lbs and tongue weight capacity of 2,400 lbs. It will fit your '19 Titan…

view full answer...

Answer 10

I looked up the trailer connector wiring diagram for a 2007 Ford F-250 which should be the same as a Ford F-350 and found the 7-way trailer connector to contain the following wires: Orange = 12 Volt Power White = Ground Black/Green = Reverse Blue =…

view full answer...

Answer 11

The pin on your Titan's 7-way trailer socket that should carry the 12V power feed for your trailer is the pin located at the 1-o-clock position as you view the socket. Please refer to the linked photo that I have prepared for you. If you have no…

view full answer...

Answer 12

For starters, if the gross combined weight rating (GCWR) is 16,200 lbs and the gross vehicle weight rating (GVWR) is 7,000 lbs then your towing capacity is 9,200 lbs, not 10,800 lbs. The correct GCWR and GVWR figures will be found on the driver's…

view full answer...