Will the Curt Echo Trailer Brake Controller Interfere with RF Devices

Question

Question:

I wanted to see if there are any RF restrictions

asked by: Mel

0

Expert Reply:

I just spoke to my contact at Curt about the Curt Echo Mobile Trailer Brake Controller part # C51180 and they informed me that there are no RF interferences from other devices that they are aware of such as cell phones and radios etc. It does afterall use a cell phone to apply the manual override and setup the controller so you have to think this went into the design process.

expert reply by: Conner L

0

click to enlarge

Answer 1

I reached out to my contact at Curt regarding your Echo Brake Controller #C51180 and he said what you are seeing is actually completely normal. Because of the sensitivity on the accelerometer you're most likely always going to have a bit of blue…

view full answer...

Answer 2

For an easy way to transport a brake controller to various trailers without physically installing the unit on your tow vehicle then we have the solution for you. The Curt Echo #C51180 is a wireless brake controller that is compatible with trailers…

view full answer...

Answer 3

The Curt Echo Trailer Brake Controller #C51180 won't itself provide any charge to your trailer mounted battery, but you certainly can still have a 12V power wire ran from the 7-Way to the battery for this purpose with the Echo in place. The Echo…

view full answer...

Answer 4

I spoke with my contact at Curt about the Curt Echo Mobile Trailer Brake Controller part #C51180 and they have said that the brake controller has been tested from a distance up to 50' through several walls so you should not have any concerns with…

view full answer...

Answer 5

The Timbren Axle-Less Trailer Suspension System part #TASR7KS01 could be used to replace the axles and suspension on a Keystone Montana 5th Wheel Trailer. However, this would require changing the entire geometry of the suspension which is a rather…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 10

Currently the Curt Echo Trailer Brake Controller #C51180 will not work with Android Auto on your vehicle dash. So while you will be able to use it on your android phone it will not interfere with you using the OneControl app while connected to…

view full answer...

Answer 11

I have a few things for you to check when it comes to not being able to pair your iPhone with the Curt Echo #C51180. The first thing to do is make sure that you're pairing your phone with the Echo through the app. If you paired it through the…

view full answer...

Will the Curt Echo Trailer Brake Controller Interfere with RF Devices

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching