Recommended Trailer Wiring Harness for 2018 Honda CR-V

Question

Question:

Hi guys. I have a 2018 Honda CR-V and just looking for the right trailer harness can you help?

asked by: Jerry

0

Expert Reply:

For your 2018 Honda CR-V I recommend the T-One Vehicle Wiring Harness # 118741. This custom harness will plug right into the factory port located on the driver's side interior trim panel in the rear cargo area. It has the highest amp rating available for your vehicle and Tekonsha is well known for making extremely reliable products.

This will provide you with a 4-Way connector to connect with and power a trailer's basic signal lights. I have attached an installation video on the 2018 Honda CR-V that you can use for reference.

expert reply by: Chris R

0

Answer 1

For your 2019 Honda CR-V the Tekonsha T-One Vehicle Wiring Harness #118741 will work perfectly. This is a custom "plug-and-play" harness that features a high amp capacity for the lights and comes with Tekonsha's great reputation for…

view full answer...

Answer 2

Yes, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118741 comes with instructions and pictures on how to properly install the harness on your 2017 Honda CR-V.

view full answer...

Answer 3

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 4

Thanks for the picture! That is definitely not the connector you are looking for. I have attached a picture below that will show you exactly where to look to find the connector. You are indeed looking for a white connector, but with a red tip. I have…

view full answer...

Answer 5

The best option we have for you is the 3-Leaf Double-Eye Spring part #e84SR with the Single-Axle Trailer Hanger Kit part #APS4. This option will replace the leaf springs and leaf spring hanger brackets which is needed because the new double eye leaf…

view full answer...

Answer 6

I recommend installing our etrailer Trailer Hitch Receiver #e98848 on your 2024 Honda CR-V Hybrid. I have included an installation video at the bottom of the page which shows the installation on a 2024 Hybrid we had in our shop. If you are needing a…

view full answer...

Answer 7

Yes, we do have a hitch that will fit your 2022 Honda CR-V Hybrid Touring. It is the EcoHitch Hidden Trailer Hitch Receiver item #306-X7345. This hitch is custom fit and bolts directly to your CR-V's frame with included hardware. If you look…

view full answer...

Answer 8

The 07100 bearing number you referenced is an older bearing that has the same dimensions as #L44643. If both the inner and outer bearings on your existing trailer are the 07100/ #L44643, and the hub has a 4 on 4 inch bolt pattern, the correct…

view full answer...

Answer 9

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit and…

view full answer...

Answer 10

The correct wiring harness for your 2019 Honda CR-V LX with FWD is the Tekonsha T-One #118741 which is compatible whether it's a FWD (like what you have) or AWD. This harness plugs into factory wiring inside your rear hatch area. We have actually…

view full answer...

Answer 11

You don't necessarily need to have a tow package on your 2018 Honda CR-V to be able to install the Tekonsha T-One Vehicle Wiring Harness, part #118741. All 2017-2020 CR-V's have a 6-pin connector present behind the driver's side trim…

view full answer...

Answer 12

It is not uncommon for a trailer to lean to one side even from the factory as heavier appliances can be on the same side or there could be multiple slides on that side. In order to try and combat this issue there are options from SumoSprings and…

view full answer...