Can Convert A Ball Gooseneck Adapter # CAB-C5G Be Used with Removable Gooseneck Ball

Question

Question:

Can you use this adapter with a removable goose neck ball ?

asked by: Pat N

1

Helpful Expert Reply:

Yes, the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G that you referenced can be used with a removable style gooseneck ball.

expert reply by: Jameson C

1

Answer 1

Yes, it will. The Pull-Rite Super Glide 5th Wheel Hitch mounts on industry standard rails which is exactly what the Adapter Rails for Curt 5th Wheel Hitch item #C88KR provide. This adapter will drop right down into the puck system of the Ford OEM…

view full answer...

Answer 2

With a few exceptions, you will indeed need a sliding hitch for your short bed Silverado. Here are the exceptions: • You won't need a slider if your 5th wheel is equipped with a rotating pin box like the Reese Sidewinder/Revolution or the Lippert…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 7

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 8

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 9

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 10

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 11

Yes there is! The Husky 31326 hitch is made to fit the industry standard fifth wheel rails (ISR). The Curt Adapter #C88KR is also made to the same industry standard measurements. So the Curt Adapter #C88KR will be exactly what you need to use your…

view full answer...

Answer 12

While it is recommended to use a sliding 5th wheel for a short bed truck so that you have plenty of clearance for sharp turns, it is not necessarily required as it depends on your truck and trailer configuration. If you are using the same trailer…

view full answer...

Can Convert A Ball Gooseneck Adapter # CAB-C5G Be Used with Removable Gooseneck Ball

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching