Replacement Hanger Kit For a 10,000LB Tandem Axle Tilt Trailer With 2" and 5-1/2" Hanger Heights
Question:
I have a 10,000 lb tilt trailer I would like to replace the hanger kit ,your apt8 has the right sized parts except for the front hangers are 2 inch and the center measures 5 1/2 inch . are these hangers available ?
asked by: Jim M
Helpful Expert Reply:
The Hanger Kit # APT3HD is going to be the closest we have to your current hangers. This kit does have the same 2-1/2" front and rear hangers as the Kit # APT8 you found but it has the taller 5-7/16" center hangers which is very close to your current 5-1/2" hangers. This slight difference in hanger size will result in a slightly higher trailer height likely only around 1/4". The old springs likely have more sag than that depending on the age of the trailer.
Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Redline
more information >
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Search Results: suspension kits
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Article: Where to Position the Trailer Axle?
- Video: Hopkins Trailer Breakaway Kit Review
- Video: Redline Trailer Suspension - Leaf Spring Suspension - APT3HD Review
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 3/4" Center Hole
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Q&A: Can The Trailer Breakaway Switch Mount To Larger Battery On Tilt Trailer?
- Q&A: Installation of Hanger Brackets and Springs for Tandem Trailer Axles
- Q&A: Does the Hanger Kit part # APT3HD Get Welded or Bolted to Trailer Frame
- Video: Review of Dexter Trailer Leaf Spring Suspension - Suspension Kits - K71-359-00
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Video: Review of etrailer - Brake Controller - ETBC7
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Wire Electric Trailer Brake Magnets to 12 Volt Brake Output and Ground
- Q&A: How to Wire Electric Brakes on a Tandem Axle Trailer
- Search Results: 175 wheels
- Q&A: Why are Trailer Center Hangers of Tandem Axle Hanger Kits Longer
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Search Results: 8000 lbs axle
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Axle Mounting Hardware - 3-66
- Search Results: dexter 7000 lb axle bearings
- Search Results: k71~720~00