Cover Recommendation for 19 Foot Long 1999 Coleman Niagara

Question

Question:

I have a 1999 Coleman Niagara pop up with a cargo box on the front. The dimensions show the box as being 19foot long, but I only see covers going to 18. Is there a 19foot to 20foot cover?

asked by: Russ C

0

Expert Reply:

Yes, we have the Classic Accessories Deluxe PolyPro III part # CA80043 which is designed to fit pop ups from 18 to 20 feet which would work well for you. Your 1999 Coleman Niagara being 19 feet would work really well with this size.

expert reply by: Jameson C

0

Answer 1

Instead of extending the black wire from the 7-Way plug in 7-way upgrade kit part #ETBC7 to the battery under the hood you would extend the black wire from the plug to the positive side of the battery in the back of the vehicle with a 40 amp circuit…

view full answer...

Answer 2

If your plan was to install a brake controller you'd have to also run the black wire of the 7-Way Adapter part #30717 to the to the positive post of your vehicle battery as well as the ground you mentioned. The Curt Echo part #C51180 that you…

view full answer...

Answer 3

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

view full answer...

Answer 4

That's a good question, and in order to use the Curt Echo Mobile Trailer Brake Controller #C51180, it requires simply the 12 volt, ground, and turn signals be connected to the 7-way on your truck. So you will need the 12 volt connected that you…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 9

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 10

From what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the…

view full answer...

Answer 11

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 12

We have not had the opportunity to do a brake controller installation on a 2023 Nissan Frontier yet. But if the plug is located in the same place as the 2022 model year, then the plug will be tucked behind the kick plate located to the left of the…

view full answer...