Comparing the Curt and Draw-Tite Trailer Hitches for a 2019 Kia Sorento

Question

Question:

What are the differences between the Curt and Draw-Tite hitches for my 2019 Sorento? They both look the same but they look like they have different capacities?

asked by: Andy

0

Expert Reply:

The weight ratings for the Curt # C13195 and Draw-Tite # 75908 for your 2019 Kia Sorento do differ but since they both exceed the max weight ratings for your Sorento (found in your owner's manual) they don't really play an important role when comparing these 2 hitches.

The biggest difference between the Curt and Draw-Tite options is that Curt requires that the support strap # 18050 be used for any non-trailer loads like a bike rack whereas the Draw-Tite doesn't have this same requirement.

When it comes to receiver location the Draw-Tite will sit about 1/4" further out and 3/4" higher than the Curt option which we found when installing both of these on a 2018 Sorento.

Out of the available trailer hitches for your 2019 Sorento I actually recommend going with the etrailer.com # e98843. This option has the higher weight rating and installation location of the Curt but it comes in a matte black finish for a rugged look and it doesn't require the use of a support strap. Since the receiver location is similar to the Draw-Tite it will still provide adequate ground clearance when using a bike rack or cargo carrier.

Installation videos and instructions have been linked for you to check out as well.

expert reply by: Jon G

0

Answer 1

When folded up, the Hollywood Racks Destination 2 #HLY94FR will not block the reverse lights on a 2020 Toyota Rav4. I can presume it would be the same deal with your 2018 Toyota Rav4. I've included the install video of the 2020 Rav 4 to show you…

view full answer...

Answer 2

I'd recommend going with the American manufactured etrailer.com brand hitch, part #e98843. This hitch is reasonably priced and features a durable matte black finish. For a wiring harness, I'd go with the #118583 from Tekonsha or the Curt…

view full answer...

Answer 3

The etrailer Trailer Hitch Receiver item #e98843 is the same hitch as the Curt item #C13195 except for the different powder coating. The etrailer hitch will have the same exact dimensions as the Curt. I have included a diagram I made that will show…

view full answer...

Answer 4

The Class II Draw-Tite #DT66MR is compatible with all models of the 2020 Kia Sorento, including your SX model. I'd recommend going with a Class III hitch which uses the more common 2 inch receiver size which has a higher capacity and is also…

view full answer...

Answer 5

I see you ordered a class 1 1-1/4" trailer hitch receiver for your 2015 Toyota Prius so you will want to make sure you buy a bike rack that is also compatible with that receiver. The Inno Tire Hold 1 Bike Platform Rack - 1-1/4" and 2"…

view full answer...

Answer 6

We do have a couple options for your 2022 Honda CR-V, however I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7345. This hitch is capable of handling up to 3,500lbs trailer weight, and 525lbs of tongue weight. For wiring, I recommend the…

view full answer...

Answer 7

We do indeed have a 2 inch hitch that works with the 2022 Kia Niro PHEV. You'll want to use the Curt 13497 Class III hitch, which we carry as part #C37BR. If your Thule rack is compatible with a 1-1/4 inch hitch, you'll want to use a reducer…

view full answer...

Answer 8

Thule has a Wingbar Edge roof rack that fits your 2022 Toyota Highlander with the part numbers #TH69FE, #TH29SC, and #TH22R. This is the most versatile and quietest roof rack available for your vehicle.

view full answer...

Answer 9

For your 2017 Nissan Rogue, I recommend the Draw-Tite Class III Max Frame Receiver Hitch #75902. This is a Class III trailer hitch that has a 3,500 pound towing capacity and 350 pound tongue weight capacity, although I also recommend checking your…

view full answer...

Answer 10

The Curt Trailer Hitch item #C13195 will work with your 2020 Kia Sorento but the wiring harness item #TK24FR will not because you do not have the towing package. Yours has different connectors than the Sorento's with the towing package. To…

view full answer...

Answer 11

For your 2018 Toyota Tacoma that has the factory step bumper, I recommend the Curt Hitch #C13264. This Class III hitch is confirmed to fit your truck and will use existing holes in its frame for a no-drill installation. It features a 6,000 pound…

view full answer...

Answer 12

Yes, that note is accurate. A Class I trailer hitch receiver is limited to only 2 bikes regardless of the amount of weight it's carrying. This is due to the exaggerated force caused by the additional leverage from the bikes being further away…

view full answer...

Comparing the Curt and Draw-Tite Trailer Hitches for a 2019 Kia Sorento

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching