Recommended Trailer Hitch and Trailer Wiring Harness for 2019 Kia Sorento

Question

Question:

Which trailer hitch and trailer wiring is needed for a 2019 Kia Sorento?

asked by: David F

0

Expert Reply:

I'd recommend going with the American manufactured etrailer.com brand hitch, part # e98843. This hitch is reasonably priced and features a durable matte black finish.

For a wiring harness, I'd go with the # 118583 from Tekonsha or the Curt # C56332 if the vehicle has the tow package. For a ball mount, go with the # 2753 ball mount and # 19260 for a 1-7/8 inch ball or # 63845 for a 2 inch ball.

I've linked to some installation videos that you might find helpful.

expert reply by: Mike L

0

Answer 1

The Class II Draw-Tite #DT66MR is compatible with all models of the 2020 Kia Sorento, including your SX model. I'd recommend going with a Class III hitch which uses the more common 2 inch receiver size which has a higher capacity and is also…

view full answer...

Answer 2

It sure can. You might need to push the spare a couple of inches toward the front of the vehicle as it's lowered or raised to clear the hitch, but you'll have no problem whatsoever using the spare if need be. If you'll be using the hitch…

view full answer...

Answer 3

The Curt Trailer Hitch item #C13195 will work with your 2020 Kia Sorento but the wiring harness item #TK24FR will not because you do not have the towing package. Yours has different connectors than the Sorento's with the towing package. To…

view full answer...

Answer 4

We were able to reinstall the spare of the 2019 Hyundai Santa Fe we installed the Curt hitch part #C13195 on. If you check out the attached install link around the 8:30 mark you can see the spare mounted with the hitch. When you go to raise and lower…

view full answer...

Answer 5

A tow package for your 2007 Hyundai Santa Fe could be a frame mounted trailer hitch and trailer wiring harness. If you have either or both of those two things you could pretty easily assume you have the tow package. Another option you have is to take…

view full answer...

Answer 6

For your 2019 Hyundai Santa Fe I recommend the Curt Class III Round Tube Receiver Hitch #C13195. This Class III hitch is confirmed to fit your Santa Fe and it will use existing holes in the vehicle's frame for a no-drill installation. It will…

view full answer...

Answer 7

The Draw-Tite #75908 is more hidden with the recessed aspect of the hitch pin hole being 5-1/2 inches from the outermost part of the bumper. The height is 15-1/2 inches from the inside top of the receiver to the ground. The Curt #C13195 is very…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, that note is accurate. A Class I trailer hitch receiver is limited to only 2 bikes regardless of the amount of weight it's carrying. This is due to the exaggerated force caused by the additional leverage from the bikes being further away…

view full answer...

Recommended Trailer Hitch and Trailer Wiring Harness for 2019 Kia Sorento

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching