Roof Rack and Canoe Carrier Recommendation for 2019 Kia Sportage with Naked Roof

Question

Question:

For my 2019 Kia Sportage that has a naked roof which roof rack and canoe carrier should I get?

asked by: Phillip

0

Expert Reply:

Inno roof rack part numbers # INXB108-115, # INXS200, and # INK686 would be what I recommend for your 2019 Kia Sportage with a naked roof. This rack will give you aero shaped bars that will offer minimal wind noise and will install easily.

Then for a canoe carrier the Thule Portage part # TH819 would fit and be a great choice as well. It will let you carry the canoes facing down and comes with straps needed to secure the canoe.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Inno Square Crossbars - Steel - Black - 54" #INB137, Feet #INSUT, and Fit Kit #INK686 that you referenced is confirmed to fit your 2019 Kia Sportage if it has the naked roof without roof rails. I attached a link to our return policy that…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The Inno Aero Crossbar System part #INXB108-115, part #INXS200, and part #INK642 is a great cost effective option for a 2015 Honda Civic Coupe and what I recommend using. In fact, it is the most cost effective option we have with the aero shaped…

view full answer...

Answer 5

The custom fit kit part #INK642 that you referenced is the correct fit kit for the 2013 Honda Civic Coupe. To complete the roof rack system you will need Inno Aero Crossbars part #INXB130-138 and Inno Through feet part #INXS250. The Inno crossbars…

view full answer...

Answer 6

There are a couple of things that set the Rhino Rack system using #RRVA150B-2, #RRRCH4, #RRRCP43-BK apart from the Inno system that uses parts #INXB138-2, #INXS350, #INTR154 you're looking at. I'll start out by saying that when it comes to…

view full answer...

Answer 7

Crossbar spread is a key factor in determining the accessories and loads that the system can safely carry on a car. To properly measure, you will need to measure from the center of one bar to the center of the other. This is the correct way to…

view full answer...

Answer 8

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 9

Yes, there is a roof rack that will fit your 2023 Mazda CX-5. This mounts directly to the side of your roof without drilling and has more than enough capacity for a bike rack. You will want the roof rack by Rhino Rack and it includes the following…

view full answer...

Answer 10

The Buyers Products Mud Flaps #337B1018LSP are considered a universal fit and so long as you have enough room to mount them, they will fit on your 2019 Chevy Blazer. The mud flaps are 10" wide x 18" tall x 1/4" thick so you would need…

view full answer...