Will the Valterra Extension Rod Kit # T1046-12VP Fit a Plymouth Waste Valve

Question

Question:

Thanks for the quick response. With the luck I have it wont work. Whole new blade assembly. Yuck!

asked by: Cheryl N

1

Helpful Expert Reply:

I am not sure if the Extension Rod Kit # T1046-12VP will be compatible with your current system but I did go out to the warehouse and measured the outside and inside diameter of the rod with a digital caliper and found those to be 0.30" and 0.20" respectively. If your current rod has these dimensions then it is possible it will work.

expert reply by: Jon G

1

Cheryl N.

10/17/2018

Thanks for the quick response. With the luck I have it wont work. Whole new blade assembly. Yuck!

Reply

Jon G.

10/17/2018

We actually have quite a few options for replacement waste valves on our site! One of the most common/popular is the Valterra Bladex # T50 which has 3" hub and 3" lug fittings. If these fittings aren't correct for your application or you aren't sure I would be happy to help you find a replacement option. Just send me a picture of what you have an I can make a recommendation!

Reply

Answer 1

Your axle picture is a little blurry but it looks like I can tell that it's a 3,500 lb Lippert torsion axle so the lift kit you'd need is the part #LC270682 if the axle is orientated like a "square" or part #LC382741…

view full answer...

Answer 2

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 3

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights…

view full answer...

Answer 4

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…

view full answer...

Answer 6

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Answer 7

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 11

You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available for what you have that…

view full answer...

Answer 12

I spoke with my contact at Progressive Dynamics and they informed me that the Lithium Converter for WFCO RV Power Centers part #PD4655LIV does work as an upgrade for the Parallax 7355. It has the same housing as the Replacement Converter for…

view full answer...

Will the Valterra Extension Rod Kit # T1046-12VP Fit a Plymouth Waste Valve

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching