Comparing the Tekonsha Trailer Wiring Harness for 2018 Chrysler Pacifica # 118723 and # 118712

Question

Question:

Thanks for the reply. I am shocked that the connectors are different for the different trims of the Pacifica. Usually, the assembly line uses the same wiring harness brake connectors for all models and trims, there just might be different features left off of different wiring harnesses (heated seats, etc.). However, this leads me to the question I guess I am really getting at... What wiring harness will work for my 2018 Chrysler Pacifica Touring Plus (notice, no "L")?

asked by: Tom D

0

Expert Reply:

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118723 is the custom fit for 2017 and 2018 Chrysler Pacifica Touring and LX models. The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118712 is the fit for 2017 and 2018 Chrysler Pacifica (excluding hybrid), Touring L Plus, Touring L, and Limited models. The connectors are different based on the trim models but it appears the modulite is the same amperage.

expert reply by: Jason S

0

Tom

10/23/2018

Thanks for the reply. I am shocked that the connectors are different for the different trims of the Pacifica. Usually, the assembly line uses the same wiring harness brake connectors for all models and trims, there just might be different features left off of different wiring harnesses (heated seats, etc.). However, this leads me to the question I guess I am really getting at... What wiring harness will work for my 2018 Chrysler Pacifica Touring Plus (notice, no "L")?

Reply

Jason S.

10/23/2018

I reached out to my contact at Tekonsha and the correct harness for your Touring Plus (no L) is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118712. Chrysler did use two different connectors with different pin outs and a different alignment location as well so they are not interchangeable. They have a gray connector and a black connector that are different. Your vehicle will have the black connectors that the harness above will fit.

Reply

Answer 1

We have both 1-1/4-inch Class II and 2-inch Class III hitches confirmed to fit the 2018 Chrysler Pacifica Hybrid that are shown on the linked page. Both Class II hitch #C12180 and Class III hitch #C13383 will require temporary removal and…

view full answer...

Answer 2

Unfortunately we do not have a video of the installation for the Curt #C11370 yet, but I have attached the instructions in case you haven't seen those; it should help clarify things. You will need to remove the spare from the trunk for…

view full answer...

Answer 3

I have attached a link to the installation instructions for the Curt Class I Trailer Hitch, #C11370 and links to trailer hitch installation tips that will help, but we have not had a chance to install this hitch on a Nissan Sentra yet because we rely…

view full answer...

Answer 4

Other than the fact that they install a bit differently, and the Curt model isn't compatible with the SE-R model, both hitches are similar with the same 2000 lb towing/200 lb tongue weight capacity. If you'll be using the hitch as an…

view full answer...

Answer 5

The Tekonsha T-One Vehicle Wiring Harness #118723 referenced in your question will work perfectly on your 2017 Chrysler Pacifica Hybrid, as long as it is the LX or Touring model. This custom harness will install by connecting directly to the built-in…

view full answer...

Answer 6

The Tekonsha wiring harness part #118712 plugs into the vehicle's wiring harness behind the driver's side and passenger-side tail lights. The tail lights need to be temporarily removed to find the wiring harness to plug into. There are two…

view full answer...

Answer 7

Long story short, the Hybrid model doesn't use a specific harness part number that's unique. The harness needed will depend on whether the vehicle has LED or incandescent taillight assemblies. When we researched the available taillight…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Comparing the Tekonsha Trailer Wiring Harness for 2018 Chrysler Pacifica # 118723 and # 118712

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching