Replacement Braking Assembly for Lippert 3,500 Lb Axle
Question:
Hi, are these the correct replacement breaks for my trailer ? Item # AKEBRK-35-SA. Pick included two axle 3500 each thanks
asked by: Rich
0
Expert Reply:
Yes, the Electric Trailer Brake Kit part # AKEBRK-35-SA is correct for your Lippert 3,500 lb trailer axle. I called the manufacturer to confirm this. If you also need to replace the hub/drum then you will want to use the Trailer Hub and Drum Assembly part # AKHD-545-35-K
I have attached review video for you as well.
expert reply by:
Conner L
0
click to enlarge
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Q&A: Replacement Wheel Hub Recommendation for Carson Trailer with 5 on 5 Bolt Pattern and 3500 LB Axle
- Q&A: Recommended Replacement 3,500 lb Axle for Carson Trailer with 88" Hub-Face and 74" Spring-Center
- Search Results: 7 pin trailer wiring harness
- Search Results: 7 pin connector
- Search Results: led side marker lights
- Search Results: 7 pin
- Search Results: trailer wiring
- Search Results: wire
- Search Results: trailer wireing
- Article: Trailer Wiring Diagrams
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: 7-Way Molded Trailer Wire Connector, 4' Long
- Shop: Jacketed 2 Wire (Brake Wire) - 12 Gauge - per Foot
- Shop: Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Shop: Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Video: Deka Wiring 12-2-1 Review
- Video: Hopkins Wiring - Trailer Connectors - H20043 Review
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-210 Review
- Video: Performance Tools Bearings, Races, and Seals Installation Set Review
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Most Popular Wheel Bearings
- Shop: Base Plate for Tow Bar
Explore Expert Info
![Our Expert]()
on Trailer Brakes
on Trailer Brakes
