Replacement Roof Vent Lid With 3-Point Hinge

Question

Question:

Thank you for the photo; from that it looks like you have a 4-point hinge (like in the accompanying photo I added) and we do have a cover, the Vent Cover for Jensen Trailer Roof Vents - White # 61628 which may work for you. If you have an older vent there is also the Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge # CAM40147 which fits 14" x 14" Jensen vents with pin-style hinge (pre-1994). Another option is the MaxxAir UniMaxx Universal Replacement Lid # MA00-335001 (White) or # MA00-335002 (Smoke) which is 15-1/2" long x 14-3/4" wide x 3-1/2" tall and will drill into the frame of your roof vent. I have added links to video reviews of these vents as well as a link to our entire selection of roof vents for you to check out.

asked by: Brian Q

0

Expert Reply:

Thank you for the photo; from that it looks like you have a 4-point hinge (like in the accompanying photo I added) and we do have a cover, the Vent Cover for Jensen Trailer Roof Vents - White # 61628 which may work for you. If you have an older vent there is also the Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge # CAM40147 which fits 14" x 14" Jensen vents with pin-style hinge (pre-1994).

Another option is the MaxxAir UniMaxx Universal Replacement Lid # MA00-335001 (White) or # MA00-335002 (Smoke) which is 15-1/2" long x 14-3/4" wide x 3-1/2" tall and will drill into the frame of your roof vent.

I have added links to video reviews of these vents as well as a link to our entire selection of roof vents for you to check out.

expert reply by: Kyle S

0

click to enlarge

Brian Q.

10/10/2018

Thank you for the photo; from that it looks like you have a 4-point hinge (like in the accompanying photo I added) and we do have a cover, the Vent Cover for Jensen Trailer Roof Vents - White # 61628 which may work for you. If you have an older vent there is also the Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge # CAM40147 which fits 14" x 14" Jensen vents with pin-style hinge (pre-1994). Another option is the MaxxAir UniMaxx Universal Replacement Lid # MA00-335001 (White) or # MA00-335002 (Smoke) which is 15-1/2" long x 14-3/4" wide x 3-1/2" tall and will drill into the frame of your roof vent. I have added links to video reviews of these vents as well as a link to our entire selection of roof vents for you to check out.

Reply

Kyle S.

10/10/2018

Thank you for those extra photos; it sure does look like you have a three-point hinge and the replacement is going to be the Replacement Cover for Heng's and 1995+ Jensen Style Vents # CAM40153. This has the exact same hinge style as yours and should be exactly what you need.

Reply

Answer 1

Thank you for the picture of your vent lid! Based on that the correct replacement lid is the part #BVD0449-A01.

view full answer...

Answer 2

I've attached one of our installation videos that covers the process, but it's extremely simple. All you'll do is untwist a tab on each side of the old hinge to allow it to slide off; then slide the new Ventline Cover #BBC0530-01 onto the…

view full answer...

Answer 3

Slide out motors in RVs are powered by 12 volt DC power sources like the part #LC236575 that you referenced and the #LC130057.

view full answer...

Answer 4

The Hollywood Racks Sport Rider 2 2-Bike Platform Rack #HR1000Z does include an anti-wobble hitch bolt, but using the threaded Anti-Rattle Hitch Lock #HRLHPTC might help with some of the movement inside the hitch receiver. This kit also includes a…

view full answer...

Answer 5

The method you described would be a great way to determine what length to cut the #H20046. That way you would end up with enough wire that it wouldn't come unplugged when making a tight turn. Securing the wire up and out of the way is a smart…

view full answer...

Answer 6

It looks like Thule switched to strap #753-3535 for many bike racks. The hard plastic piece offers reinforcement so the strap lasts longer. It should not affect the fit. Provided you have a Thule rack that uses straps that install around the arms…

view full answer...

Answer 7

I checked with Kat's Heaters and for your 2011 Hyundai Santa Fe with the 3.5L engine the correct Engine Block Heater is part #KH11812. This cartridge style heater will install in the rear right (RR) position on the engine block, which is the…

view full answer...

Answer 8

RV ladder #LA-401 is the longest ladder we offer at 99-1/2 inches tall. If you have a height of 105 inches you can still use the 99-1/2 inch ladder it will just be a little shorter. The ladders we carry are universal fit items meant to fit most…

view full answer...

Answer 9

If you are going to unhitch your tow vehicle from the camper and you have a weight distribution system on your vehicle, you will want to unhook the weight distribution from your tow vehicle. First, make sure the trailer is level and chock the tires…

view full answer...

Answer 10

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

view full answer...

Answer 11

We have numerous racks that are rated for use behind an RV or trailer that would work for you. A rack with 4 inches of clearance probably will not work. The regular XC, #S64650, measures 10-1/2 inches from the center of the hitch pin hole out to the…

view full answer...

Answer 12

Since we do not have both of these rear seat organizers in stock today for me to compare them physically I point you to their respective weights as a potential indicator of build-quality. The Du-Ha #DU10300 and the Husky #HL09031 both fit the 2015…

view full answer...

Replacement Roof Vent Lid With 3-Point Hinge

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching