Spacers for Lippert Power Stabilizer Jack

Question

Question:

Have to replace the rear lippert stabilizer, got caught on stump, not all the way up. Do I need to add the 2 inch spacers to the new one? They are welded on the old one, was not included on the new one, Lippert 298707. The damaged one was a Lippert 198641 on a 2015 Forest River Cherokee 26RR Toy Hauler.

asked by: Kenny M

0

Expert Reply:

You do not necessarily need to add the Lippert Components Double Spacer for RV Electric Stabilizer Jack # LC266030 to your new Lippert Components High-Speed Power Stabilizer Jack # LC298707.

If you install your new stabilizer and find you need the extra 2 inches the spacer provides you can simply add them afterwards.

expert reply by: Kyle S

0

click to enlarge

Answer 1

I attached a picture that shows the install instructions for the Lippert Components High-Speed Power Stabilizer Jack #LC298707 that you referenced and in it you'll notice a set distance isn't specified for where it has to install on the…

view full answer...

Answer 2

The powered stabilizer jack set you'd need to replace the 198641 is the part #LC298707 as the number you have now has been discontinued but the #LC298707 is basically the current version of what you already have so it will fit and work great as a…

view full answer...

Answer 3

The Lippert Components Power Stabilizer Trailer Jack #LC298707 that you referenced will work as a replacement for your 198641 stabilizer jack. The specific part number you have now though is not longer available. Price is down below at the product…

view full answer...

Answer 4

Hey Joe, yes the Lippert stabilizer jack part #LC298707 does fit your Grand Design Transcend 245RL but it is sold individually so if you wanted a set for the front and the rear you would need to order a quantity of two.

view full answer...

Answer 5

The Lippert High-Speed Power Stabilizer Jack part #LC298707 would be an excellent replacement option for the now discontinued 337199 model. It does come with a new switch so you can either wire this up or reuse the existing, either way the switch…

view full answer...

Answer 6

You made a great choice in the Lippert Components Power Stabilizer Trailer Jack. For starters, all of the jacks measure to be 70-1/2" long with a 3,500 lb weight capacity and have a 30" lift. The difference between them is in regards to…

view full answer...

Answer 7

Hey Chad, yes the Lippert stabilizer jack system part #LC298707 is the current replacement for the 1917771. It's actually twice as fast as what you mentioned so it will be a really solid upgrade.

view full answer...

Answer 8

The Lippert Components Power Stabilizer Trailer Jack #LC298707 has a unique wiring connection. I've attached the diagrams for the switch so you can determine the correct connection. I'm assuming your black and white wires pictured are black…

view full answer...

Answer 9

From the center of the hitch pin to the upright portion of the base of the Yakima EXO Swing Away Cargo Carrier part #Y74ZR measures 4-1/4 inches. The Straightshot extender part #Y69VR then could add an additional 7-1/4 inches so hopefully that would…

view full answer...

Answer 10

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Spacers for Lippert Power Stabilizer Jack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching