Does the Front Mount Trailer Hitch Install Above or Below the Front Bumper on a 2004 Jeep Wrangler

Question

Question:

I have a 2004 jeep wrangler. stock front bumper. does the tow hitch pt # 31408 attach to the top or below the stock bumper ? Thank you

asked by: Dave

0

Expert Reply:

The CURT Front Hitch, # 31408, attaches to the top of the front bumper on your 2004 Jeep Wrangler. I have included a link to installation instructions and a photo of a similar hitch in the same mounting location for you.

The front mount hitch makes a great attachment point for a winch mounting plate or tow hook loop, see links.

expert reply by: Robert G

0

click to enlarge

Answer 1

It doesn't look like the Curt front hitch part #31198 would fit your 2001 LX470. The measurements of this hitch are 38-7/8 inches from side to side, 2 inches from front to back 1-7/8 inches from the mounting flange to the cross tube.

view full answer...

Answer 2

Yes the install of the Curt front hitch part #C31014 on your 2003 Ford F-250 does use the front leaf spring bracket like you mentioned. I attached a picture I took from the install instructions (also linked) that shows how it all goes together.

view full answer...

Answer 3

This front-mount hitch receiver, part #31352, is the correct specified part for your 2005 Ford Expedition 4WD. I spoke to my contact at Curt Manufacturing regarding the third mounting hole, which evidently is missing from your Expedition. I am told…

view full answer...

Answer 4

Since your 2001 Ford F-350 has the blocker beam (which is what I believe you were referencing when you mentioned extra cowl), you can definitely install the Curt Front Mount Trailer Hitch Receiver #C31014. The 34 inch frame is actually a cab and…

view full answer...

Answer 5

For your 2003 Ford Explorer 4-door none of the front hitches we offer require the removal of tow hooks prior to installation. The Curt hitch part #31540 has been confirmed as a fit and would work well for you. There will be some drilling for…

view full answer...

Answer 6

I was able to get the measurements you were looking for of the Draw-Tite front mount hitch that fits your 2020 Toyota Tundra, which is the following: - Draw-Tite Front Mount Trailer Hitch Receiver #65080 The hitch is similar to the Curt #31198 in…

view full answer...

Answer 7

If you are referring to the draw bars (also called arms) for a set of flat towing base plates that are installed on your 2003 Ford Explorer we do offer these. If you are referring to factory tow hooks these we do not offer and you will need to obtain…

view full answer...

Answer 8

I spoke with my contact at Curt and he stated that the Curt Front Mount Trailer Hitch, #31198, will not sit flush with the bumper on your 2007 Toyota Tundra 2WD, but about 2-3 inches back. We offer the Curt Electric Winch Mount Plate, #C31010, that…

view full answer...

Answer 9

According to the installation instructions, the tow hooks should have been reinstalled when the Curt Front Mount Trailer Hitch Receiver, part #31198, was installed on your 2013 Toyota Tundra Unlimited. I have attached a picture from the instructions…

view full answer...

Answer 10

The length from the inside of one mounting bracket to the other is 27" on the Curt Front Mount Trailer Hitch Receiver #31540. Distance from mounting holes center to center is 30" and the mounting plate thickness is 5/16". Refer to the…

view full answer...

Answer 11

If you cut a hole in the skid plate of your 2019 Toyota Tundra when installing the Curt front hitch #31198 you would not be required to remove the hitch to change the oil. I attached a diagram that shows where to cut the hole for access.

view full answer...

Answer 12

I attached a picture that has the most relevant dimensions of the Curt #31408. The length of the main crosstube as well as the distance between the mounting holes. The vertical height would be just a little over 2-1/2 inches. Our hitch manufacturers…

view full answer...

Does the Front Mount Trailer Hitch Install Above or Below the Front Bumper on a 2004 Jeep Wrangler

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching