Will Tow Ready T-One Wiring Harness Fit 2011 Lexus RX450h Not Equipped With Tow Package

Question

Question:

I have the 2 wheel drive 2011 RX450H without a trailer towing pkg. Can I plug your wiring harness into a connector, which I found tucked behind the bumper, and I will be ready to go?? Thanks

asked by: Greg

0

Expert Reply:

I contacted our representative at Tow Ready about the Tow Ready T-One Wiring Harness # 118255. The representative at Tow Ready informed me that the # 118255 will fit your 2011 Lexus RX450h that is not equipped with tow package.

The # 118255 is a circuit protected harness which is designed to protect the vehicles sensitive wiring harness against shorts.

expert reply by: Reno H

0

Answer 1

There is a possibility of 2 different problems. The first is that if you have the front wheel drive model RX350 and the factory tow package, then the Curt Custom Fit Vehicle Wiring, part #56083 is not compatible with your 2010 Lexus RX350. The other…

view full answer...

Answer 2

Not necessarily. If your 2015 Lexus RX 350 came with the tow package then you just need the T-One #118252, but if it doesn't have the tow package then you need the T-One #118255 with the converter. The tow battery fuse slot would only be used if…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Will Tow Ready T-One Wiring Harness Fit 2011 Lexus RX450h Not Equipped With Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching