How Does the Pack'Em Expansion Pack Part # PK-OP1 Install on a Trailer

Question

Question:

Will the PK-6s one trimmer work work with the PK-OP1 expansion pack?

asked by: Craig

0

Expert Reply:

The Pack'Em Trimmer Rack part # PK-6S installs directly on the trailer's side rail (see photo 1). The Pack'Em Expansion Pack part # PK-OP1 installs on a set of uprights like the Pack'EmTower Kit for Pack'Em Racks part # PK-BM (see photo 2) so I am not really sure I understand what you mean. They do not attach to one another.

Please let me know if you need further clarification.

expert reply by: Conner L

0

click to enlarge

Answer 1

You shouldn't have any issues using it on the Pack'Em Rack for Open Utility Trailers, Part #PK-OP1. Adapters are required for STIHL 420, 550, and 600, ECHO or RedMax backpack blowers but not for other models such as your BR200.

view full answer...

Answer 2

Yes, the Pack'Em Rack for Open Utility Trailers #PK-6-OP1 will work with no additional parts. However, adapters are required for certain blowers, STIHL 340, 350, 550 and 600 models require #RA-STIHL. If you don't have these products…

view full answer...

Answer 3

Adapters are required for STIHL 420, 550, and 600, ECHO or RedMax backpack blowers but not for other models such as your BR200 You shouldn't have any issues using it on the Pack'Em Rack for Open Utility Trailers, Part #PK-6-OP1.

view full answer...

Answer 4

There is no recommended center to center distance for the Pack Em Trimmer Rack, #PK-6, but they must be mounted a minimum of 3ft apart. Trimmers come in different sizes and lengths, so it is best to mount the racks to fit your specific trimmers.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

We definitely have something! For your Stihl blower, I recommend the Rack'Em Storage Rack for Enclosed Trailers - Adjustable #RA-39 along with the Utility Trailer Tower Kit for Pack'Em Ladder Rack or Rack'Em Blower Rack…

view full answer...

Answer 7

The Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers #D210 does not come in any other drop. If you need more than the 2 inch drop, then your only option to also have the bike rack receiver is to use the Gen-Y…

view full answer...

Answer 8

I wish I had something I could recommend for you, but I went out into our warehouse and measured the Pack'Em Trimmer Rack for Open Utility Trailers #PK-6 that you referenced and the largest diameter pipe it could handle would be about 1-7/8…

view full answer...

Answer 9

The Erickson Retractable, Ratcheting Tie-Down Straps #EM34416 will not loosen once tightened. The problem you are most likely experiencing is that you tighten your ATV down and then after a few miles the ATV has moved around slightly or settled due…

view full answer...

Answer 10

Coupler Repair Kit #CA-5100-RK includes all parts needed to rebuild an etrailer brand or Ram brand 5K-rated 2-inch ball coupler with a trigger latch. It consists of all components other than the housing. If you have one of these models - #CA5100B,…

view full answer...

Answer 11

The etrailer Weld-On A-Frame 2-5/16-Inch Coupler, part #CA5400, does not have any adjustment screw to enable you to take up the slack in the fit with your hitch ball. This coupler is produced by a stamping process and this type of manufacturing…

view full answer...

Answer 12

All of our Trimmer Racks are bolt mounted, so you will have to custom mount them on a round top rail. You will either have to run bolts through your tube or run U-Bolts around your top tube. For a Trimmer Rack, I recommend the Pack'Em Rack…

view full answer...

How Does the Pack'Em Expansion Pack Part # PK-OP1 Install on a Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching