Recommended Trimmer Rack for Open Utility Trailer with Round Top Rail

Question

Question:

I have an open trailer but the top rail is round 2.5 to 3 inch tubing . Can you please tell me which trimmer rack will work with my trailer?

asked by: Chris C

0

Expert Reply:

All of our Trimmer Racks are bolt mounted, so you will have to custom mount them on a round top rail. You will either have to run bolts through your tube or run U-Bolts around your top tube.

For a Trimmer Rack, I recommend the Pack'Em Rack # PK-6-OP1. This holds 3 trimmers, 1 blower, 1 line spool, and one cooler. It is a very nice system with a gray powder coat finish. This does not come with mounting hardware, but does come with keyed alike locks.

If you are looking for a more basic rack, I suggest the Rackem Lockable Trimmer Rack, # RA-6RL. This is a very strong and durable system. that requires 2 locks. This system does not come with mounting hardware.

expert reply by: Jason S

0

Answer 1

Yes, the Pack'Em Rack #PK-6-OP1 can be installed onto a trailer with round tubes instead of angle iron. It'll likely take a little creativity. We have a review from a customer who had the same situation and was able to use U-bolts for the…

view full answer...

Answer 2

I believe you are talking about the Pack'Em Rack for Open Utility Trailers part #PK-6-OP1 if that is the case we have the Accessory Holders for Pack'em Utility Trailer Towers part #PK-OP1 which will give you exactly what you want an…

view full answer...

Answer 3

All of our trimmer racks like the Lockable Dual Trimmer Rack for Open Utility Trailers #288-01811 are bolt-on. So, you'd either need to run a bolt through the tube on your trailer, or you'll need to run U bolts around the tube.

view full answer...

Answer 4

Yes, the Pack'Em Rack for Open Utility Trailers #PK-6-OP1 is compatible with your 2' high trailer sides. The supports don't necessarily have to rest on the floor of your trailer so you can raise them to whatever height is needed for your…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Electric brakes have 2 wires located at the back. One is for power and the other is for ground (it doesn't matter which is used for which function). The ground wires should be connected to the trailer frame. The only other place that would carry…

view full answer...

Recommended Trimmer Rack for Open Utility Trailer with Round Top Rail

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching