Will the Thule SnowPack Extender Fit Yakima JetStream Roof Rack Crossbars

Question

Question:

Will the Thule SnowPack Extender work on the Yakima jetstream bars?

asked by: Crystal N

1

Helpful Expert Reply:

Yes! I am pleased to report that the Thule SnowPack Extender # TH7325 will fit the Yakima JetStream roof rack crossbars. I have linked a video review of this rack for you.

expert reply by: Michael H

1

Answer 1

The Thule SnowPack ski carrier #TH7325 will fit the Rhino-Rack Vortex aero crossbars so they are compatible with each other. The Rhino-Rack and Thule bars are similar in width and height so the carrier will fit without any modification or special…

view full answer...

Answer 2

The T-Channel Mount Kit for the Kuat Grip, part #GRDMK, is not compatible with the Kuat Switch, part #KU44FR. The swivel of the Switch make it so it cannot be replaced. I've linked to a video review of this carrier for you to see how it works.…

view full answer...

Answer 3

To determine which Thule replacement hardware you'd need we have to know which Pull Top you have. The part #7533998 is for the TH725 and the part #TH7520970001 is for the TH726 both of which are discontinued. Since you said you also need the…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 10

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...