Trailer Brake Controller Recommendation for a 2003 GMC Yukon XL and 2012 Crossroads Sunset Trailer

Question

Question:

I have a 2003 yukon xl. would a p2 or p3 tekoshna be best? new trailer will be a 2012 crossroads sunset trail. would both models have the correct wiring harness? thanks

asked by: John

0

Expert Reply:

For your 2003 GMC Yukon XL, I recommend the Tekonsha P2, # 90885. It is one of our most popular controllers because it is easy to set up and use and it offers diagnostics. The P3, # 90195, is a great controller but is geared more towards individual with brake controller experience. It has a lot of diagnostics and features, though and would work well. Both controllers are compatible with electric trailer brake systems as well as electric over hydraulic systems.

For your Yukon XL, you will just need the wiring harness, # 3015-P. If your vehicle came with a factory installed 7-Way trailer connector, you will not need any other parts. If it did not come with a wiring harness, you will need the 3015-P harness and Replacement Multi-Tow 7-Way and 4-Way Trailer Connector, # 30955.

The 3015-P harness plugs into the brake controller an into a port on the vehicle. The 30955 harness, if needed, plugs into a factory wiring harness located above the spare tire.

I have included links to the installation details for the P2 and a video showing a typical installation of the 3015-P harness.

expert reply by: Michael H

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...