12 Volt Power Not Working on 2019 Ram 1500

Question

Question:

My 12 volt power pin isn't working on my 2019 Ram 1500. Could it be a fuse?

asked by: Rich

0

Expert Reply:

Did it work to begin with? If not I'd take the truck back to the dealer since it's brand spankin' new. If you want to check the fuse yourself from what I've found it's located in Cavity F01.'

If you're really ambtious you can run some wire, part # 10-1-1 which is sold by the foot, through a circuit breaker, part # PK54530, to the Ram's battery.

expert reply by: Charles S

0

Answer 1

The 18 inch long Equal-i-zer weight distribution shank part #EQ90-02-4600 does give most trucks and trailers the ability to tow with the tailgate down like it sounds like you are planning on doing and like what you see in the attached picture. Now…

view full answer...

Answer 2

Sounds like you are looking for the Curt Weight Distribution Shank part #C17122. This shank is 14 inches from the hitch pin hole to the vertical adjustment holes that the head of the system will install to. This will also work with your E2 Fastway…

view full answer...

Answer 3

We don't offer a Blue Ox 2-1/2 inch shank that would meet your needs, but we do offer a solution for you. The Curt #C17131 weight distribution shank would be a good choice that would be compatible with your system. It will provide the industry…

view full answer...

Answer 4

The Blue Ox TrackPro Weight Distribution System part #BLU77FR comes with a 2" shank. It's not available with a 2-1/2" shank but you can swap out the one that comes with for one such as the Blue Ox Track Pro Weight Distribution Shank for…

view full answer...

Answer 5

If the 12-volt pin on your trailer connector isn't working, you've got a missing or blown fuse or the wiring connection at the fuse box under the hood wasn't finalized. You're looking for a 40 amp fuse, located in position #68 in the…

view full answer...

Answer 6

Sounds like your air compressor is drawing more amperage than your adapter is rated for. A better adapter solution would be the part #118019 which doesn't have the 10 amp restriction like your current adapter. If you check out the review video I…

view full answer...

Answer 7

You didn't mention adjusting the brakes so I believe that is where your problem lies as this is a very common problem. You want to tighten the brake assemblies so that there is a light drag on the hub/wheel as you turn it otherwise the brakes…

view full answer...

Answer 8

When you installed the new brakes did you adjust them? Drum brakes require an initial adjustment and then periodic adjustment (for manual adjust brakes) to keep them at optimum braking performance. Basically you will know the brakes are adjusted…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

12 Volt Power Not Working on 2019 Ram 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching