Westin Fey Bumpers for 1985 Chevrolet C/K Series Pickup

Question

Question:

I have a FEY Chrome bumper on my 1985 Chevrolet Silverado short bed pickup truck But I backed into a mail box post and bent the bumper. Some of the chrome is also pealing off. I don’t know if the bumper came on the truck when it was new or not I bought the truck in 1990 the truck looks Great except for the back bumper.

asked by: John B

0

Expert Reply:

We offer a number of aftermarket Fey bumpers for your 1985 Chevrolet C/K Series Pickup so long as it is NOT a flareside/stepside type bed. These appear on the page I linked for you and they include 3 chrome-finish models as well as silver and black bumpers too.

The chrome bumper parts we can offer you are:

Westin Fey Surestep Deluxe XLT # 21007-92230
Westin Fey Surestep Rear Bumper # 21002-92230
Westin Fey Diamondstep Rear Bumper # 21000-92230

All of these bumpers offer no-drill installation and include a complete custom bracket and hardware mounting kit.

expert reply by: Adam R

0

Answer 1

According to my contact at Curt, the distance from the mounting flanges to the top of the receiver on the Curt Class V Trailer Hitch, #C15317, is 7-1/4 inches. This hitch was designed to fit the Chevrolet and GMC C/K pickup trucks from 1988-2000…

view full answer...

Answer 2

The Westin Fey Surestep Rear Bumper, #21002-92230, is chrome-plated steel. I included the picture showing the chrome a little better. The top has a step pad on it. The rest of the bumper is so shiny it is reflecting the white room the picture was…

view full answer...

Answer 3

Yes, we have the Westin Fey Diamondstep Rear Bumper, #20000-92230 in a black powder coat finish that is confirmed to fit the 1988 Chevrolet C/K Series Pickup. Note the link below of this being installed on a 1986 model.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Westin Fey Bumpers for 1985 Chevrolet C/K Series Pickup

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching