Is Andersen Ultimate Connection 5th Wheel Compatible With Reese 5th Wheel Rail Adapter for Ram

Question

Question:

Will this accommodate the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter

asked by: Jasmine

1

Helpful Expert Reply:

Yes it will!

The Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package # RP30154 will accommodate the Andersen Ultimate Connection 5th Wheel Trailer Hitch System # AM3200.

The Andersen fits into industry-standard base rails and the Reese Adapter gives your Ram truck those rails.

expert reply by: Kyle S

1

Answer 1

For a custom fifth wheel rail kit that fits your short bed 2020 Chevy Silverado 1500 we have a couple really great Reese options. We have the outboard part #RP56015-53 as a confirmed fit for your truck which is the easiest to install and the best…

view full answer...

Answer 2

For truck beds that are shorter than 6 feet like on your 2019 Chevy Silverado 1500 with a 5-3/4 foot bed you have two options for towing a fifth wheel trailer and preventing truck cab to trailer nose interference. You can use the Demco Hijacker…

view full answer...

Answer 3

I do have an option for you but the Reese Sidewinder king pin like part #RP34FR is not compatible with the Andersen Ultimate Hitch like part #AM3200 because the Sidewinders are not compatible with adapters or hitches that only have one center point…

view full answer...

Answer 4

We have the Andersen Ultimate Fifth Wheel Connection part #AM3200 which is the correct adapter to fit the industry standard fifth wheel rails you have. Reese hitches like what you have, and nearly all other fifth wheel hitch manufacturers, make their…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

The Curt A25 5th Wheel Trailer Hitch for Ram Towing Prep Package #C16046 will work well with the Roto-Flex pin box. The combination will be a good match for you and this hitch with the specific connection to the factory prep package pucks will make…

view full answer...

Answer 10

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

view full answer...

Answer 11

To replace the motor on the LCI Pump 650057 we have the Replacement Motor #LC167576.

view full answer...

Answer 12

There is an easy way to figure out how to determine what height setting a fifth wheel hitch such as the Reese M5 #RP30890 needs to be in your 2019 GMC Sierra 2500, just keep in mind you will need five to six inches of space from your Silverado's…

view full answer...

Is Andersen Ultimate Connection 5th Wheel Compatible With Reese 5th Wheel Rail Adapter for Ram

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching