Difference In Installation of Trailer Hitch Between Single and Dual Exhaust 2016 Chrysler 200

Question

Question:

I viewed your installation video for the 2016 Chrysler 200. The installation was on a four cylinder single exhaust model. I have a six cylinder dual exhaust stock model. Does the installation procedures change because of this?

asked by: Rinaldo D

1

Helpful Expert Reply:

I took a look at the installation instructions of the Draw-Tite # 24919 hitch (which are also linked for you) and found the only difference when installing it in the single or dual exhaust models of a 2016 Chrysler 200 are that the single exhaust models require trimming of the underbody panel.

Apart from that they are the same bolt-on installation and will not require any drilling in your Chrysler's frame.

expert reply by: Kyle S

1

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

I do have a solution for you but the problem is that the trailer hitches for the 2015 Chrysler 200 are all rated for 200 pounds tongue weight. The combined weight of the scooter and a carrier would exceed that 200 pound capacity. The best option is…

view full answer...

Answer 3

I included an image for the instructions for Draw-Tite trailer hitch #24919. As you can see the receiver will be basically the only part visible. This is because it is welded to the bottom of the cross tube which is hidden. If you plan on doing some…

view full answer...

Answer 4

To convert the 1-1/4" receiver opening on the Curt Trailer Hitch Receiver #C11020 for your 2008 Smart fortwo to a 2" receiver you can use the Trailer Hitch Adapter #e93YR. With that being said, any adapter will reduce the weight rating of…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Difference In Installation of Trailer Hitch Between Single and Dual Exhaust 2016 Chrysler 200

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching