How Long is the Solera 8.5' Slider (Slide-Topper) Canvas

Question

Question:

How wide is the canvas on the 8.5foot Solera Slide Topper # LCV000168107?

asked by: David

0

Expert Reply:

I spoke to my contact at Lippert and they informed me that the canvas on the Solera 8.5' Slider (Slide-Topper) part # LCV000168107 is 97" long. Please keep in mind that the key to selecting the correct slide-topper is by measuring the box width range which is measured on the outside front of box, including flange. This slide-topper fits a box width range of 92" to 97-3/4". If you have a different box width range then please let me know what it is and I will be sure to help you get the correct slide-topper.

expert reply by: Conner L

0

Answer 1

Sure thing! For your first slide-out measuring 104-1/2", I recommend checking out the: -Solera RV Slide-Out Awning #LCV000168325. This topper is black in color, and will fit slide-outs 104"-109" wide and up to 48" long. For your…

view full answer...

Answer 2

Since you need 6 inches of clearance and only have 2.75 inches, there's no reason you couldn't simply use the shorter, 7 foot slide topper #LCV000168105. The trade-off, as you're undoubtedly aware, is that the 7 foot topper is not going…

view full answer...

Answer 3

Since the overall width of your awning measures 125-3/4 inches flange-to-flange, I recommend the 11-ft topper #LCV000163294. This topper is designed for an overall box width with the flanges from 122 to 127-3/4 inches. This topper is White, but if…

view full answer...

Answer 4

The Solera 7' Slider (Slide-Topper) in Black w/ Black Hardware #LCV000168105 has an actual fabric width of 79 inches. The topper is measured for fit based on the flange to flange measurement of the slide-out to provide protection for the box that…

view full answer...

Answer 5

If the measurements that you took were from flange to flange then for your smaller slideout you want the 7-1/2' Solera Slider (Slide-Topper) which comes in Black #LCV000165062 or White #LCV000163287. Then for your larger slideout you want the…

view full answer...

Answer 6

The actual width of the fabric/canvas on the Solera Slide-Topper Awnings will be right at the max box width range. The max box width range for the Solera Slide-Topper Awning part #LCV000165062 for black or part #LCV000163287 is 85-3/4"…

view full answer...

Answer 7

The correct way to measure for a slide topper awning is from the outside edge of each flange. If this is where you measured to get 107" then you would want to use the Solera 9.5' Slider Slide-Topper part #LCV000163291 for white or part…

view full answer...

Answer 8

To adjust the tension on your Solera RV Slide-Out Awning, #LCV000163285, you'll want to remove the slide topper from the brackets and reroll the awning roller 14 times to add enough tension to the springs. You'll also want to ensure your end…

view full answer...

Answer 9

Since the minimum clearance needed to fit a slide topper is three inches from the slide out and in your case the main awning you do have enough clearance to install one. Since your slide out is 83 inches wide the correct slide topper you need is the…

view full answer...

Answer 10

For an 82" slide out you will want the 85" Solera RV Slide-Out Awning item #LCV000165062 you were looking at. This will not be too small. You will want to ensure you have a minimum of 7" of clearance on both sides of your slide-out. I…

view full answer...

Answer 11

In regards to the Solera Slide Topper Awnings, the overall width is actually adjustable so I don't have an exact figure for you. This is because you can slide the hex extension rod in and out of the support arm bracket. The correct way to choose…

view full answer...

Answer 12

We've checked with Solera before and they've said that 3 inches of clearance is the minimum needed for their Solera slide toppers to fit. So if you have 3 inches it would be tight but it would fit. Based on your flange dimension being 129…

view full answer...