Possible Replacement Roof Vent Lid Recommendation for Horton Hauler Enclosed Trailer

Question

Question:

Looking for replacement vent cover for Horton hauler enclosed trailer. Vent size is 14 x14, has a snap on plastic continuous hinge see attached pictures. Is this item available for purchase? Please let me know ASAP. Thank you

asked by: Nancy R

1

Helpful Expert Reply:

The hinge looks VERY similar to the part # BVD0449-A03 that we offer but slightly different possibly as it's hard to see in the picture. Does the # BVD0449-A03 look like what your roof vent had prior?

expert reply by: Jameson C

1

click to enlarge

Answer 1

You will want to look at the size and the hinge style when looking for a replacement vent lid. There are different styles of a continuous hinge. If you can snap a pic of the existing hinge on the vent or lid and email that to me I can point out the…

view full answer...

Answer 2

To remove the damaged vent cover, remove the connection to the actuating strut, so the cover can tilt all the way upwards. To do this, you will need to remove the interior screen, the knob and the interior trim piece. Then, remove the two screws that…

view full answer...

Answer 3

Thanks for the picture of your RV roof vent lid that you need a replacement for. Seeing that makes it easy to know what you'd need with the part #BVD0449-A03.

view full answer...

Answer 4

The Ventline Replacement Dome Assembly for Ventadome Trailer Roof Vent, part #BVD0449-A01, includes half of the hinge mechanism. The dome and this portion of the hinge are molded together as one piece. If the dome assembly and its hinge, and also the…

view full answer...

Answer 5

The closest option we have to what you described in your question is the Ventline Dome Assembly in White #BVD0449-A01 or Smoke #BVD0449-A03. This cover measures 14 inches x 14 inches and features a continuous plastic hinge (see attached image). I…

view full answer...

Answer 6

Most square trailer roof vents are the 14 x 14 size that fit into a roof opening of 14-1/4 x 14-1/4-inches. This is the vent size that Replacement Dome Assembly #BVD0449-A03 will fit. You will want to check the type of hinge you have on your vent…

view full answer...

Answer 7

Unfortunately I don't have a parts list for your trailer, so I can't tell you what you need without some pictures or a further description. Roof vents have a standard size of 14-1/4 x 14-1/4 inches, but there are different hinge types.…

view full answer...

Answer 8

If your vent has a model number at all it would likely be on the inside on a sticker. The old cover may have the information molded into it. Otherwise you will need to go by the size and the hinge style. I have included a picture showing the various…

view full answer...

Answer 9

We will have a cover that will work for your trailer vent. The standard measurement for this type of cover is 14x14 inches. We will need to know what type of hinge your current cover has to make sure that you receive that correct cover. The attached…

view full answer...

Answer 10

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 11

I was able to confirm with the manufacturer that the Replacement Actuator for Thomas Payne Seismic Power Recliner part #SC96MR cross-references to the QDPT-01-002. Therefore, the two are cross-compatible.

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...